SIPLACE CA4 V2规格说明书.pdf - 第46页
46 Technical data Placement machine dimensions Placement machine center of gravity X = 1400 mm Y = 1050 mm Z = 630 mm S = center of gravity These cen ter of grav ity coordina tes apply for the mac hine with a PCB conveyo…
45
Technical data
Dimensions and setup conditions
Length
a
With handles for side sliding doors
a) Measured at the outer contour of the machine protection.
1950 mm
2100 mm
Width
Outer contour of machine protection
With 2x SWS outermost
With 2x SWS innermost
On the component trolley and table position "outermost" (handle folded in)
On the component trolley and table position "outermost" (handle folded
out)
2740 mm
4087 mm
3778 mm
2890 mm
3640 mm
Height of machine (for PCB conveyor height 930 mm)
Up to upper edge of monitor
With 2-color indicator lamp
With 3-color indicator lamp
Without indicator lamp (height of packaging)
With opened protective cover
With opened side sliding doors
1572 mm
1794 mm
1835 mm
1600 mm
2095 mm
2105 mm
Machine ground clearance
(for PCB conveyor height 900 mm)
(for PCB conveyor height 930 mm)
(for PCB conveyor height 950 mm)
195 mm ± 15 mm
225 mm ± 15 mm
245 mm ± 15 mm
Weight
SIPLACE CA4 V2 (machine without component trolley)
SIPLACE CA4 V2 (machine with 2x SWS)
SIPLACE CA4 V2 (machine with 4x SWS)
Changeover table (X)
Changeover table (X), fully configured with feeder modules
3674 kg
4374 kg
5074 kg
95 kg
190 kg
Location
b
b) Measured at the outer contour of the machine protection and at the keyboard.
5.73 m²
Load per unit area
c
With 4 component trolley X
With 4 SWS
c) The load per unit area calculation included an additional working space of 0.5 m on each side of the machine.
6.1 kN/m²
6.88 kN/m²
Number of machine feet 6
Max. noise emissions 75 dB (A)
Room temperature Between 15°C and 35°C
Atmospheric humidity 30% to 75 % (no higher than 45% on
average to prevent any possibility of con-
densation on the machine)
46
Technical data
Placement machine dimensions
Placement machine center of gravity
X = 1400 mm
Y = 1050 mm
Z = 630 mm
S = center of gravity
These center of gravity coordinates apply for the machine with a PCB conveyor height of
930 mm.
47
Technical data
Maneuvering radii for the X component trolleys
Working area (A) and minimum distance to adjacent machine 500 mm
Maneuvering distance (R) location position 600 mm
Distance L1: Machine center to outer edge of X component trolley 1470 mm
Distance L2: Machine center to wall 2300 mm