00196609-0102_ AI_Optional_Stopper_SX1_2_DE+EN.pdf - 第40页
2 Assembly Instructions for Optional Stopper SIPLACE SX1/SX2 Optional stopper Edition 09/2009 40 X Remove the metal angula r bracket from the cable duct. 2 2.5.1 Fitting the S topper on the Sensor Rail X Fit the stop per…
Optional stopper 2 Assembly Instructions for Optional Stopper SIPLACE SX1/SX2
Edition 09/2009
39
X Use a Phillips screwdriver to loosen the clamping fixtures for the conveyor sides.
2
X Dismantle the lifting table plate at conveyor lane 1.
X Remove the covers above the conveyor control.
X Open the trailing cable.
2
2
Loosen the
conveyor side
clamps 2
Trailing cable2
2 Assembly Instructions for Optional Stopper SIPLACE SX1/SX2 Optional stopper
Edition 09/2009
40
X Remove the metal angular bracket from the cable duct.
2
2.5.1 Fitting the Stopper on the Sensor Rail
X Fit the stopper onto the retaining bracket (M3x8 / 7991 hexagonal socket-countersunk head),
in the bottom position (the two top screw holes on the bracket).
Cover on
cable duct
2
Optional stopper 2 Assembly Instructions for Optional Stopper SIPLACE SX1/SX2
Edition 09/2009
41
X Fit the two approx. 500 mm long PUN3 hoses onto the stoppers and screw the stoppers onto
the sensor rail (screws M4x8 / 7380 hexagon socket fillister head).
2
Stopper2