User-Manual-NeoDen-K1830-20200618.pdf - 第21页

to co mponent list au tomatically . 4.4.2 Operation introdu ction of component list (1) Import the process ing file (2) Export the compone nt co ordinate information throu gh compu ter by cho osing met ric syst em CS V f…

4.4 Component list setting

Function: display the information and mounting order of components. The components’ quantity and mounting information

can be added through manual programming or importing files , see below figure:

4.4.1 Manual programming

(1) Select manual programming;

(2) Edit the first component: there will be an example component in the component information list, modify the sample

component and click position “align”, the page will switch to the vision of up-looking camera automatically. Move the

camera and find the first component’s center coordinate. Click save.

(3) Fill in the information of component: Stack refers to which stack No. the component located; Nozzle refers to which

nozzle used to mounting the component; Specification refers to the component’s value; Footprint refers to the common

footprint name as 0402,0603,0805 etc; XY coordinate refers to the position of where the component is mounted, align the

center position of component, it will display synchronously; The angle is based on the placement direction of components

on the circuit board. Transverse is 0 degree or 180 degree, vertical is 90 degree or negative 90 degree, which mainly

depends on the polarity of component, degree must be integer degree; Skip setting includes true or false, false means keep

mounting, true means skip mounting this component. After finish all parameters’ editing, the setting of first component

information finish.

(4) Click ‘New’ to add one row on the component list. The information will exactly copy from the top row. Click align to

find the second component’s coordinate. Then click save to edit the other information such as name, value, footprint and

angle etc. Keep adding new component until the whole PCB finish. Please note the the stack and nozzle do not need to be

edited manually. It can be set through feeder setting interface with ‘Assign all sequentially’ button to assign the information

Zhejiang NeoDen Technology Co.,Ltd.

to component list automatically.

4.4.2 Operation introduction of component list

(1) Import the processing file

(2) Export the component coordinate information through computer by choosing metric system CSV format to the USB

flash disk.

(3) Plug the USB into the machine, do not choose the manual programming, import the processing file by clicking related

layer file import button. The right side click ‘file import top layer’ and the reverse side click ‘file import bottom layer’ . It

will pop up a selecting window, choose the processing file and click save, the information will be imported to the list. (Note:

when import bottom layer, the PCB length, rows and columns of panel board need to be edited before import file)

(4) Addition of component: Click ‘New’ , the component list will copy one row from the adjacent row, then modify the

component information.

Delete component: Select the wrong component row, click delete to remove the component.

(5) Movement of component

When editing, sometimes we need to do a slightly adjustment for the edited file, we have three ways of movement:

 Move up: to move the selected component upward

 Move down: to move the selected component downward

 Move to head position: To move the selected component to the first row. Please notice the first row component must be

the same as the first component to place on the PCB.

Zhejiang NeoDen Technology Co.,Ltd.

(6) Convert to current machine coordinate

After finish all editing operation, click convert to current position. It will pop up the above dialogue, click yes, the machine

will recognize the fiducials automatically and convert all component coordinate to machine coordinate. After convert

successfully, it will pop up a dialogue, click align to check if the components’ position are still correct. (Please note: this

function only use to inspect the coordinate, cannot be saved)

(7) Position correction

After the first mounting, if there is a deviation, please click position correction to enter the new vision page. Click the left

mouse button to align the centre of the placed component; Click the right mouse button to align the centre of pad. Then

correct next one until finish all component and save. The machine will remember the position after correction. It will fix it

automatically at the second placement.

(8) Batch create components

Some circuit boards are relatively regular and easy in real editing situation. For this type of circuit board, we can generate

coordinate in batch , the interface as shown in figure:

Zhejiang NeoDen Technology Co.,Ltd.