User-Manual-NeoDen-K1830-20200618.pdf - 第35页
8.2 Component Posi tions Setup 35 Zhejiang NeoDen T echnology Co.,Ltd.
When any software upgrade is required, please copy the upgrade file into the subdirectory of U disk, click “software
upgrade” to load it. Then follow instructions to upgrade it.
English: this machine supports Chinese and English. To convert it into English, a password is required.
8.1 Feeder Position Config
This interface is used to setup pick offset and test feeding for each feeder.
The left column refers to feeder No., Pick X and Pick Y refer to the coordinates of pick offset. After “click to align”, this
interface will be displayed. Align the center of component (edge of tablet), then save it.
34
Zhejiang NeoDen Technology Co.,Ltd.
8.2 Component Positions Setup
35
Zhejiang NeoDen Technology Co.,Ltd.
36
Function: this interface is mainly used to calibrate nozzles’ positions.
P.S. Password is required to activate the items to avoid misoperation, please contact technical engineer before
calibrating.
1.Fiducial Camera Relative Position
Steps:
●Put a cooling pad on PCB, click “Rails 2” and fix the PCB on rails.
● Go to the Manual Test interface, move the head to make the nozzles stay above the cooling pad, then click “Nozzle 1
Trail” and “Back”.
●Go to the System Setup interface, ”click to align” on Fiducial Camera Relative Position.A prompt window will pop
up, ”If continue to leave trace at current position?“ After clicking ”Yes” to enter this interface (see Figure ), then click
“Nozzle 1 Trail”, the nozzle will move downwards and rotate until get a round mark. Follow the same steps to get the trail
of Nozzle #8 , then check the offset between the round mark and the white crosshair, if it’s within 0.1mm, the trail is done.
P.S. If the offset is overly beyond 0.1mm, please kindly contact NeoDen support team.
Mark Left Position: to use the left camera align the round mark
Mark Right Position:to use the right camera align the round mark
Exit: exit without operation
Save: save the date after operation
Zhejiang NeoDen Technology Co.,Ltd.