User-Manual-NeoDen-K1830-20200618.pdf - 第22页

(6) Convert to curre nt mach ine c oordinate After finish all editin g op eration, click c onvert to curre nt p osition. It will pop up the above dialogue , click yes, the machine will re cognize the fiduc ials automatic…

to component list automatically.

4.4.2 Operation introduction of component list

(1) Import the processing file

(2) Export the component coordinate information through computer by choosing metric system CSV format to the USB

flash disk.

(3) Plug the USB into the machine, do not choose the manual programming, import the processing file by clicking related

layer file import button. The right side click ‘file import top layer’ and the reverse side click ‘file import bottom layer’ . It

will pop up a selecting window, choose the processing file and click save, the information will be imported to the list. (Note:

when import bottom layer, the PCB length, rows and columns of panel board need to be edited before import file)

(4) Addition of component: Click ‘New’ , the component list will copy one row from the adjacent row, then modify the

component information.

Delete component: Select the wrong component row, click delete to remove the component.

(5) Movement of component

When editing, sometimes we need to do a slightly adjustment for the edited file, we have three ways of movement:

 Move up: to move the selected component upward

 Move down: to move the selected component downward

 Move to head position: To move the selected component to the first row. Please notice the first row component must be

the same as the first component to place on the PCB.

Zhejiang NeoDen Technology Co.,Ltd.

(6) Convert to current machine coordinate

After finish all editing operation, click convert to current position. It will pop up the above dialogue, click yes, the machine

will recognize the fiducials automatically and convert all component coordinate to machine coordinate. After convert

successfully, it will pop up a dialogue, click align to check if the components’ position are still correct. (Please note: this

function only use to inspect the coordinate, cannot be saved)

(7) Position correction

After the first mounting, if there is a deviation, please click position correction to enter the new vision page. Click the left

mouse button to align the centre of the placed component; Click the right mouse button to align the centre of pad. Then

correct next one until finish all component and save. The machine will remember the position after correction. It will fix it

automatically at the second placement.

(8) Batch create components

Some circuit boards are relatively regular and easy in real editing situation. For this type of circuit board, we can generate

coordinate in batch , the interface as shown in figure:

Zhejiang NeoDen Technology Co.,Ltd.

For example: we can see the above picture which has a rectangular block and a circular block to form a small panel. We call

such panel as submodule. We can generate the whole panel board through creating a submodule. The whole panel board has

4 panels consisting of 2 rows and 2 columns. Align the 3 head components(right top,left top and left bottom), then generate

the submodule, the submodule is shown in the figure.

We also can select stack, nozzle, name, specification and etc. to adjust in this page.

Two ways to generate submodules: rectangle and circle.

①The way to generate rectangle panel: Click: ‘submodule’, below dialogue will pop up. Please fill in specification and

footprint of component. We can see the panel has four rows and five columns. Fill in 4 rows and 5 columns in the

dialogue, and align the three components(right top, left top, left bottom). The component degree will be based on actual

situation. Click ‘create’, the machine will generate all the coordinate automatically.

Zhejiang NeoDen Technology Co.,Ltd.