3OM-1054-002.pdf - 第32页
2 . 2 Pattern Program Name T o save a pattern program, it is required to give a name to the program. Up to 32 characters (alphanumerics and marks) can be used. 2 .3 Operation Data ( A 0 1 ) P .C.B. Data Fig. 3B8 Edit Win…
(6) Multi-Model Repetitive Pattern (Unit P.C.B. B.B.R. Enabled)
Fig. 3B7
List of Required Data Table 3B14
Pattern Program
Required Data
Operation Data P.C.B. Data {
P.C.B. Recognition Data {
P.C.B. Recognition Mark Data {
Setup Data Note (a)
Placement Feeder Feeder Carriages #1 and #2 {
Location Data
Placement Data U01 Placement Data Placement Data (P Data) {
(P Data) Unit Control Note (b)
Unit P.C.B. B.B.R. {
Placement Data (O Data) {
Placement Data Un Placement Data Placement Data (P Data) {
(P Data) Unit control Note (b)
Unit P.C.B. B.B.R.
×
Placement Data (O Data)
×
(a) Specify these parameters (data) for automatic adjustment
of the conveyor and chute widths, etc.
(b) Specify these parameters (data) according to the situational
changes.
P.C.B. Recognition Marks
U02
U01
Placement Coordinate Reference Point
2.1 Types of P.C.B.’s and Required Data
01 12-003 2-12 AGS01EDTP
2.2 Pattern Program Name
To save a pattern program, it is required to give a name to the program.
Up to 32 characters (alphanumerics and marks) can be used.
2.3 Operation Data
(A01) P.C.B. Data
Fig. 3B8 Edit Window (Example)
(A01_01) Comment 1, 2
Comments on the pattern program can be specified in these text boxes.
Up to 32 characters (alphanumerics and marks) can be used.
The performance of the machine is not affected by these comments. In
other words, it has nothing to do with or without these comments.
2.2 Pattern Program Name
021 1-004 2-13 AGS01EDTP
Fig. 3B8-1
Comment 1
Comment 2
(A01_02) P.C.B. size
X (horizontal) [mm], Y (vertical) [mm], and T (thickness)
[mm]
Set the dimensions of the P.C.B. to be produced.
Unit: mm
Fig. 3B10
When the P.C.B. has a cutout, the following dimensions must
be entered.
Fig. 3B11
Data Input Range
X: 50 to 330 Y: 50 to 250 T: 0.5 to 5.0
330.000
250.000
1.600
X (Horizontal)[mm]
Y (Vertical)[mm]
T (Thickness)[mm]
Fig. 3B9
2.3 Operation Data
021 1-004 2-14 AGS01EDTP
P.C.B.
P.C.B. Flow Direction
Y (Vertical)
X (Horizontal)
T (Thickness)
Y (Vertical)
X (Horizontal)
T (Thickness)
P.C.B.
P.C.B. Flow Direction