00196602-05_SM_SIPLACE_X-Feeder_EN.pdf - 第26页

6 Repairing the X Feeder modules 6.3 Left Side Cover 26 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 Designation Size Torque Quantity RF-SN85 2.5 x 7.5 mm 0.6 Nm 1 RF-SN75 2.5 x 6 mm 0.6 Nm 4 SN213307 M2.5x5mm 0.9 …

100%1 / 90
6 Repairing the X Feeder modules
6.3 Left Side Cover
Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 25
Designation Size Torque Quantity
RF-SN85 2.5 x 7.5 mm 0.6 Nm 1
RF-SN75 2.5 x 6 mm 0.6 Nm 10
SN213307 M2.5x5mm 0.9 Nm 5 (4+8mm)
4 (12mm)
DIN965 M2.5x5mm 0.9 Nm 3
SN213307 M2.5x3mm 0.9 Nm 5
RF-SN75 2.5 x 6 mm - 1
(X) The screw (X) varies between the different feeder modules.
In 4 - 8mm feeder modules, this is a screw of type (D).
In 12mm feeder modules, this is a screw of type (C).
CAUTION
The screw marked F is easily damaged
Tighten the screw marked (F) carefully with a small Phillips screwdriver.
Make sure that this screw is NOT distorted.
6 Repairing the X Feeder modules
6.3 Left Side Cover
26 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
Designation Size Torque Quantity
RF-SN85 2.5 x 7.5 mm 0.6 Nm 1
RF-SN75 2.5 x 6 mm 0.6 Nm 4
SN213307 M2.5x5mm 0.9 Nm 11
ISO7046 M2.5x6mm 0.9 Nm 3
SN213307 M2.5x4mm 0.9 Nm E
For 4-12mm feeder modules only
► Now fit the rear sliding guide onto the feeder (see 6.2.2 "Fitting the Rear Sliding Guide" [}22]).
6 Repairing the X Feeder modules
6.4 Tape Drive
Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 27
6.4 Tape Drive
6.4.1 Pickup Window
Required spare parts
Example: pickup window 8-12mm (top), 24mm (bottom)
Feeder module Item no. Designation
4 mm 03088366-Sxx Pickup window /X4
8 mm 03010085-Sxx Pickup window /X8
12 mm 03012057-Sxx Pickup window /X12
16 mm 03021035-Sxx Pickup window assembly, /X16
24 mm 03021046-Sxx Pickup window assembly, /X24
32 mm 03021048-Sxx Pickup window assembly, /X32
44 mm 03021059-Sxx Pickup window assembly, /X44
56 mm 03021232-Sxx Pickup window assembly, /X56
72 mm 03021233-Sxx Pickup window compl. X7 2
88 mm 03021235-Sxx Pickup window assembly, /X88
Required tools
●
Phillips screwdriver
●
Tweezers
6.4.1.1 Removing the Pickup Window (4 - 12 mm)
For 12mmX feeders only
► Carefully place the feeder module down on its left
side.
► Loosen the two screws marked in the diagram.
► Lift the filler piece out of the feeder module.