00196602-05_SM_SIPLACE_X-Feeder_EN.pdf - 第67页
6 Repairing the X Feeder modules 6.6 Rocker Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 67 6.6 Rocker 6.6.1 Rocker Stripping Device (4mm only) Required spare parts Rocker Stripping Device Feeder module Item no. De…
6 Repairing the X Feeder modules
6.5 Foil Disposal
66 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
6.5.6.2 Fitting the Flap (4–12mm)
► Carefully place the feeder module with the right
side down on a stable, level and clean surface.
► Push the flap, as shown, sideways into the feeder
module.
► Press the spindle into the hole on the flap up to
the stop.
► Close the flap.
6.5.6.3 Removing the Flap (16–88mm)
► Open the flap.
► Pull the flap sideways from the feeder module.
(2)
6.5.6.4 Fitting the Flap (16–88mm)
► Fit the flap to the axis from behind as indicated.
► Close the flap.
6 Repairing the X Feeder modules
6.6 Rocker
Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 67
6.6 Rocker
6.6.1 Rocker Stripping Device (4mm only)
Required spare parts
Rocker Stripping Device
Feeder module Item no. Designation
4 mm 03087913-Sxx Stripping device /rocker X4
Required tools
●
Flat bladed (slotted) screwdriver
6.6.1.1 Removing the Rocker Stripping Device
► Remove the rocker (see 6.6.2.1 "Removing the
Rocker (4 - 88 mm)" [}69]).
► Loosen the screw that fixes the stripping device
at the top of the rocker.
► Loosen the screw that fixes the stripping device
at the bottom of the rocker.
► Pull the stripping device sideways from the
rocker.
6 Repairing the X Feeder modules
6.6 Rocker
68 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
6.6.1.2 Fitting the Rocker Stripping Device
► Place the stripping device on the side of the
rocker as indicated.
Make sure that the longer bracket is on top.
► Align the stripping device straightly and screw it
to the rocker at the top and bottom.
► Fasten the rocker (see 6.6.2.2 "Fitting the Rocker
(4 - 88 mm)" [}70]).
6.6.2 Rocker Assembly
Required spare parts
Example: rocker 8mm (left), rocker 24mm (right)