00196602-05_SM_SIPLACE_X-Feeder_EN.pdf - 第56页

6 Repairing the X Feeder modules 6.5 Foil Disposal 56 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 ► (1) Correctly insert the roller into the foil rocker, so that you can see through the roller. ► (2) Position the f…

100%1 / 90
6 Repairing the X Feeder modules
6.5 Foil Disposal
Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 55
► Push the foil rocker to the left and out of the foil
disposal drive.
6.5.4.2 Fitting the Foil Rocker 4 - 88 mm)
► Push the foil rocker from the left into the gap on
the foil disposal drive.
► Fix the spring to the hook on the foil rocker (1)
and then to the holding device shown, with a pair
of tweezers.
► Fit the ratchet (see 6.5.5.2 "Fitting the Ratchet (4
- 12 mm)" [}58]).
6 Repairing the X Feeder modules
6.5 Foil Disposal
56 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
► (1) Correctly insert the roller into the foil rocker,
so that you can see through the roller.
► (2) Position the foil rocker and roller so that you
can see through the holding device on the foil
drive.
► (3) Insert the bearing shaft into the opening and
fix the foil rocker with it to the foil disposal drive.
6.5.5 Ratchet
Required spare parts
Example: ratchet 8mm
Feeder module Item no. Designation
4, 8+16mm 03010342-Sxx Ratchet assembly,/rollers X8
12, 24- 88mm 03010354-Sxx Ratchet assembly/rollers X12
Required tools
●
Phillips screwdriver
●
Hexagon socket-head screwdriver size 2
6.5.5.1 Removing the Ratchet (4 - 12 mm)
► Carefully place the feeder module down on its left
side.
► Loosen the screw marked in the diagram.
► Now carefully place the feeder module down on
its right-hand side.
► Remove the left side cover (see 6.3.1 "Removing
the Left Side Cover" [}23]).
6 Repairing the X Feeder modules
6.5 Foil Disposal
Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 57
► Loosen the screws shown in the left-hand dia-
gram.
► Lift the cover plate off the foil disposal drive.
► Remove the rubber seal marked in the right-hand
diagram.
► Loosen the two screws marked in the diagram.
► Carefully pull the ratchet to the left, away from
the foil disposal drive.
► Carefully pull the connector to the left and out of
the connection marked in the diagram.
Pull on the connector and NOT on the cable.
► Remove the cable from the opening in the
ratchet.
The ratchet is now free.