00196602-05_SM_SIPLACE_X-Feeder_EN.pdf - 第55页
6 Repairing the X Feeder modules 6.5 Foil Disposal Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 55 ► Push the foil rocker to the left and out of the foil disposal drive. 6.5.4.2 Fitting the Foil Rocker 4 - 88 mm) ► …
6 Repairing the X Feeder modules
6.5 Foil Disposal
54 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
6.5.4.1 Removing the Foil Rocker (4 - 88 mm)
► Place the feeder module down on its left side.
► Loosen the bearing shaft marked in the diagram.
The shaft thread ends after several millimeters.
► Lift the feeder module.
► Press the bearing shaft out of the foil rocker from
the other side, with a split pin punch.
► Remove the roller from the foil rocker.
(1) Foil rocker
(2) Roller
(3) Bearing shaft
► Remove the ratchet (see 6.5.5.1 "Removing the
Ratchet (4 - 12 mm)" [}56]).
► Loosen the spring from its holding device (1) and
from the hook on the foil rocker (3) with a pair of
tweezers.
6 Repairing the X Feeder modules
6.5 Foil Disposal
Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 55
► Push the foil rocker to the left and out of the foil
disposal drive.
6.5.4.2 Fitting the Foil Rocker 4 - 88 mm)
► Push the foil rocker from the left into the gap on
the foil disposal drive.
► Fix the spring to the hook on the foil rocker (1)
and then to the holding device shown, with a pair
of tweezers.
► Fit the ratchet (see 6.5.5.2 "Fitting the Ratchet (4
- 12 mm)" [}58]).
6 Repairing the X Feeder modules
6.5 Foil Disposal
56 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
► (1) Correctly insert the roller into the foil rocker,
so that you can see through the roller.
► (2) Position the foil rocker and roller so that you
can see through the holding device on the foil
drive.
► (3) Insert the bearing shaft into the opening and
fix the foil rocker with it to the foil disposal drive.
6.5.5 Ratchet
Required spare parts
Example: ratchet 8mm
Feeder module Item no. Designation
4, 8+16mm 03010342-Sxx Ratchet assembly,/rollers X8
12, 24- 88mm 03010354-Sxx Ratchet assembly/rollers X12
Required tools
●
Phillips screwdriver
●
Hexagon socket-head screwdriver size 2
6.5.5.1 Removing the Ratchet (4 - 12 mm)
► Carefully place the feeder module down on its left
side.
► Loosen the screw marked in the diagram.
► Now carefully place the feeder module down on
its right-hand side.
► Remove the left side cover (see 6.3.1 "Removing
the Left Side Cover" [}23]).