00196602-05_SM_SIPLACE_X-Feeder_EN.pdf - 第8页
1 Introduction 1.7 Staff Qualifications and Training 8 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
1 Introduction
1.7 Staff Qualifications and Training
Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 7
1.7 Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
●
Have received first aid training.
1 Introduction
1.7 Staff Qualifications and Training
8 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
2 General
2.1 Requirements
Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 9
2 General
X Feeder Care is a package of tools, testing equipment and documents, such as manuals, de-
signed to help your service staff independently perform inspection and cleaning work, plus the most
frequent repair tasks to X feeder modules.
X Feeder Care is used in the production and maintenance environment (repair shop). Furthermore,
the X Feeder Test Station can be used, for example, at the pre-setup unit (setup area), to rapidly
check the functionality of feeders e.g. before these are stored away.
The areas in which the X Feeder Test Station and the tools provided with it are used are ESD-com-
patible. This ensures that neither that equipment itself or the components in the feeder are at risk.
The X Feeder Care [00140113-01] product consists of:
●
X Feeder Test Station [03076685-xx]
●
Job Guide "X Feeder Test Station" (German [00196352‑xx], English [00196353‑xx]
Other languages on request.
●
Job Guide "X Feeder Inspection and Maintenance" (German [00196358-xx], English
[00196359‑xx]
Other languages on request.
●
Service manual "X Feeder Care for X Feeders" (German [00196601‑xx], English
[00196602‑xx])
●
X Feeder Care tools (included in package and not available for individual order)
The X Feeder Care processes differ as follows:
●
Inspection
Tasks to check and assess the current state of the feeder modules
●
Service
Regular tasks as detailed in the service manual for inspection and cleaning, lubrication and
replacement of consumables and wear parts.
●
Repair
Tasks, for resetting defective feeders back to their original, functional state
NOTICE
Area of application
The tasks described in this manual apply for the following areas:
- X feeder modules 4-88mm with function status 4 or higher.
. X feeder modules with function state 3 and lower need to be sent to the manufacturer for
repairs.
2.1 Requirements
To correctly repair X feeder modules, you require an ESD-compatible workplace with a stable, level
and clean surface.
2.2 Warranty
CAUTION
Observe the clauses in the warranty agreements for your feeder.
On the bottom right side of the tape drive, you will find a warranty seal. If you still have a
valid warranty claim for the feeder module, this will be violated if you break the warranty
seal.