User Manual E-by-SIPLACE 用户手册.pdf - 第198页

4 Setting up and commissioning User manual E by SIPLACE 4.5 Commissioning the machine From software version SC 712.1 Edi tion 05/2019 198

User manual E by SIPLACE 4 Setting up and commissioning

From software version SC 712.1 Edition 05/2019 4.5 Commissioning the machine

197

4.5 Commissioning the machine

4.5.1 Commissioning the machine at the customer's premises

 Check all modules for correct seating.

 Wipe off the linear guide rails with a lint-free cloth

before

removing the shipping braces for the

X/Y axis. Do

not

use any solvents (see section 4.3.9, page 194).

 Switch on the machine and perform a reference run.

 Copy the placement program onto the computer and test it.

 Check the machine zero point after a period of warming up of 3 - 4 h.

 Get the customer's operating personnel to equip the feeder modules according to the cus-

tomer's placement program.

 Instruct them in handling the feeder modules using the respective Job Card.

 Check all customer-specific installed options (in particular software) for good functioning and

order any necessary spare parts using the order form or by fax.

4.5.2 Instructing the customer's personnel

 Explain all customer-specific installed options, in particular software/software compatibility.

 Explain programming of the SIPLACE Station Programming.

 Instruct the operators and line engineers in using the station software.

 Explain about password protection.

 Instruct the customer's personnel according to the user manual.

4.5.3 A test run or starting production

 Test the line using the test PCB or a PCB provided by the customer.

 Record the customer product and performance data, prepare the data and document the data

in the installation report.

 Create security copies.

4 Setting up and commissioning User manual E by SIPLACE

4.5 Commissioning the machine From software version SC 712.1 Edition 05/2019

198

User manual E by SIPLACE 5 Working with the machine

From software version SC 712.1 Edition 05/2019 5.1 Staff profiles

199

5 Working with the machine

This chapter contains a number of subjects that are intended to help you during your daily work

on a SIPLACE line. For example, you are provided with preventative measures that you can take

to minimize the down time on the machine to obtain the highest possible level of efficiency for the

SIPLACE line during production.

5.1 Staff profiles

PLEASE NOTE

Correct usage with qualified personnel

Incorrect usage poses a risk to life and limb and a risk of damage to equipment.

 Only appropriately qualified personnel may put the machine into operation, operate it

or perform work to the machine. For more information, refer to section 1.3.5

, page 25.