User Manual E-by-SIPLACE 用户手册.pdf - 第89页
User manual E by SIPLACE 2 Operational safety From software version SC 712.1 Edition 05/2019 2.8 Residual volt ages and discharge times in the machine 89 2.8 Residual voltages and discharge times in the machine 2 2 DANGE…
2 Operational safety User manual E by SIPLACE
2.7 Safety features From software version SC 712.1 Edition 05/2019
88
2.7.5 Hand guard (Dummy Feeder E)
2.7.5.1 Hand guard (Dummy Feeder E) at the locations
The hand guard is to be used when there is a gap in between feeders on the component table.
Slot the hand guard in the gap between feeders.
Push the hand guard until it touches the stop rail and the back of the feeder is in line with other
feeders.
2
Fig. 2.7 - 7 Dummy feeder E on the table locations
(1) Dummy feeder E by SIPLACE, item no. 03113786-xx
WARNING
Operatio nal
Operational safety by occupying every second location!
The operational safety of the fixed table or changeover table in the E by SIPLACE is en-
sured if at least every second free location is occupied with a feeder module or hand guard
(dummy feeder).
Even when configuring manual tray carriers or a automatic tray changer, secure ev-
ery second location with a hand guard (dummy feeder).
(1)
User manual E by SIPLACE 2 Operational safety
From software version SC 712.1 Edition 05/2019 2.8 Residual voltages and discharge times in the machine
89
2.8 Residual voltages and discharge times in the machine
2
2
DANGER
Dangerous voltage levels!
The machine is supplied with 3 x 200 V~, up to 3 x 415 V~ mains voltage.
This means that some parts of the system carry potentially lethal voltages - even when
switched off at the main power switch.
Incorrect handling of this machine can therefore result in death or severe injury or consid-
erable damage to equipment.
Always follow the applicable accident prevention and DIN regulations (particularly EN
60204, part 1 or IEC 60204, part 1) and the applicable regulations in your own coun-
try.
The covers of the power supply unit may ONLY be opened by appropriately qualified
personnel.
CAUTION
Data loss!
To avoid losing data, assess the following criteria before switching off your machine (apart
from in emergencies):
– Has the machine finished transmitting machine, setup and panel data?
– Has the machine finished processing the PCB?
– Has the machine completed the run-up phase?
2 Operational safety User manual E by SIPLACE
2.8 Residual voltages and discharge times in the machine From software version SC 712.1 Edition 05/2019
90
2
Fig. 2.8 - 1 Position of the main power switch
(1) Main power switch
2.8.1 Machine switched off at the main power switch
2
(1)
DANGER
Dangerous voltages at the main switch after switching off the machine
The input terminals of the main switch carry dangerous voltages after the machine has
been switched off at the main switch.
Never open the cover at the main switch.