User Manual E-by-SIPLACE 用户手册.pdf - 第69页
User manual E by SIPLACE 2 Operational safety From software version SC 712.1 Edition 05/2019 2.2 Warning labels 69 2.2.10 Warning label on the changeover table 2 Fig. 2.2 - 17 Warning labels on the changeover table In fi…
2 Operational safety User manual E by SIPLACE
2.2 Warning labels From software version SC 712.1 Edition 05/2019
68
2.2.9.1 Warning label "Sensitive conveyor sides"
2
Item no. 03110412-01 (1 on each conveyor side and placement area)
Sensitive conveyor sides!
The conveyor sides are highly sensitive and may not be moved
unless the brakes have been released.
Moving the sides without releasing the brakes can cause irrepa-
rable damage to the conveyor sides.
User manual E by SIPLACE 2 Operational safety
From software version SC 712.1 Edition 05/2019 2.2 Warning labels
69
2.2.10 Warning label on the changeover table
2
Fig. 2.2 - 17 Warning labels on the changeover table
In fig. 2.2 - 17, page 69, hand crushing label, item no. 03118888-01 (1 label on the left side and 1
label on the right side)
Hand crushing
Hand crushing
2
RISK OF HAND CRUSHING!
Lifting and lowering the changeover table can crushing the hands.
Take care when lifting and lowering the changeover table.
Observe the description in Section 4.4 on page 195.
2 Operational safety User manual E by SIPLACE
2.3 Classification of optical systems From software version SC 712.1 Edition 05/2019
70
2.3 Classification of optical systems
2.3.1 Classification of the whole machine
2
2.3.2 Laser classification
The following modules are assigned to laser class 2:
– Component sensor on SIPLACE CP14
2.3.3 Classification of camera systems
2
The operational machine as a whole is classified as laser class 2.
The laser classes are determined according to IEC 60825-1:2014.
PLEASE NOTE
The camera illumination system used has bright LEDs fitted. These are classified as risk
group 1, according to IEC 62741:2006.
Do not look into beam!