Printer 600 Machine Programming.pdf - 第56页
0$&+,1( 352*5$00 ,1* 67$*(( )250)/(; 722/,1* 1.56 User Manual Software Ve rsion 07SP04 The following windo w and menu bar is displayed: 28. Select Continue (F1). The mess age ‘ T able at Cont act Height. Check…
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
Software Version 07SP04 User Manual 1.55
21.Select Open Cover (F7).
22.Either:
a. Open the front printhead cover.
or
b. Raise the printhead shutter.
23.Using the board on the rails as a template, slide the appropriate size and
number of FormFlex blanking plates on to the tooling modules outside the
area of the squeegees/ProFlow transfer head. Secure the plates using the
thumbscrews.
24.Either:
a. Close the front printhead cover.
or
b. Lower the printhead shutter.
25.Press the System button.
26.Select Vision Height (F3). The message ‘Table at Vision Height. Check
Tooling Clearance’ is displayed.
27.Select Contact Height (F3).
Unload
Vision
Height
Home
Height
Board
Clamps
Change
Screen
Open
Cover
Exit
Unload
Vision
Height
Home
Height
Board
Clamps
Change
Screen
Open
Cover
Exit
Contact
Height
Tra nspr t
Height
Change
Screen
Open
Cover
Exit
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
1.56 User Manual Software Version 07SP04
The following window and menu bar is displayed:
28.Select Continue (F1). The message ‘Table at Contact Height. Check
Tooling Clearance’ is displayed.
29.Select Open Cover (F7).
30.Either:
a. Open the front printhead cover.
or
b. Raise the printhead shutter.
31.Place the FormFlex setup plate centrally over the tooling modules and rails
and place the weights on top of the setup plate.
32.Align the weights along the centre line in the Y axis and one third of the plate
Contact Height Warning
WARNING Check for obstructions between
the Rails and the Screen
Continue
Open
Cover
Exit
Continue
Open
Cover
Exit
Vision
Height
Open
Cover
Exit
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
Software Version 07SP04 User Manual 1.57
length in the X axis.
33.Press the operator switch on the front of the machine covers.
34.Wait until the pneumatic indicator on the front cover displays green.
35.Remove the weights and the FormFlex setup plate from the tooling area.
36.Either:
a. Close the front printhead cover.
or
b. Lower the printhead shutter.
37.Press the System button.
C/L
1/3
1/3
BoardSetup Plate Weight (in 2 positions)