Printer 600 Machine Programming.pdf - 第94页
0$&+,1( 352*5$00 ,1* 0(183$5$ 0(7(56 1.94 User Manual Software Ve rsion 07SP04 NOTE This par ameter is not displ ayed, if Screen Si ze in Set Prefere nces has been selected to Scr een Library . Print Ar ea Length T…
0$&+,1(352*5$00,1*
0(183$5$0(7(56
Software Version 07SP04 User Manual 1.93
Centre line of the image - centre justified image
Image Y This parameter defines the dimension in the Y axis from the front inner edge of
the stencil frame to either:
Front edge of the image - front justified image
Rear edge of the image - rear justified image
Centre line of the image - centre justified image
Barcode Y This parameter defines the dimension between the centre of the barcode to the
outer rear edge of the stencil frame or adaptor.
Screen Adapter The type of screen adapter needed, if any, for the stencil to be used for this
product.
NOTE
This parameter is not displayed, if Screen Size in Set Preferences has been
selected to Screen Library.
Screen Image The position of the image in the stencil frame. Options are:
NOTE
This parameter is not displayed, if Screen Size in Set Preferences has been
selected to Screen Library.
Custom Screen This option allows user definable stencil image positions. Selection of this
parameter activates the Print Area Length, Print Area Width and Distance To
Image. Options are:
Minimum Maximum Increment Default
60.0mm Stencil Length - 100.0mm 0.1mm 330.4mm
Minimum Maximum Increment Default
60.0mm Stencil Width - 100.0mm 0.1mm 330.4mm
Minimum Maximum Increment Default
10.0mm Stencil Length - 10.0mm 0.1mm 97.0mm
Options Available
None
255
Sanyo
Heraeus
20 X 20
12 X 12
Options Available Notes
Edge Justified Permitted for Sanyo and Fuji frames only
Centre Justified -
0$&+,1(352*5$00,1*
0(183$5$0(7(56
1.94 User Manual Software Version 07SP04
NOTE
This parameter is not displayed, if Screen Size in Set Preferences has been
selected to Screen Library.
Print Area Length This is the maximum printable distance in the Y direction, ie the maximum
distance the squeegee can travel, front to back.
NOTE
This parameter field only appears if Custom Screen has been selected.
Print Area Width This is the maximum length of squeegee that could be fitted to the printer, taking
into account stencil frame and the amount of mesh surrounding the mask. This
is also the maximum length of paste that can be dispensed.
NOTE
This parameter field only appears if Custom Screen has been selected.
Distance to Image The meaning of this parameter varies, depending on whether an image is centre
or edge justified. For centre justified images, the dimension is the distance from
the outside rear of the stencil frame to the centre of the image plus half the board
width. For edge justified images, the dimension is the distance from the outside
rear of the stencil frame to the front edge of the board.
NOTE
This parameter field only appears if Custom Screen has been selected.
Board Width This parameter sets the rail width for this particular product. It is also used to
set a default value for the print stroke, the clean screen, the board stop position
in the Y direction and the AutoFlex rows. The maximum value depends on the
Options Available
Enabled
Disabled
Minimum Maximum Increment
100.0mm 508.5mm 0.1mm
Minimum Maximum Increment
100.0mm 510.0mm 0.1mm
Minimum Maximum Increment
306.0mm 645.0mm 0.1mm
0$&+,1(352*5$00,1*
0(183$5$0(7(56
Software Version 07SP04 User Manual 1.95
stencil type selected.
NOTE
With the remote board stop fitted the minimum is 119mm and the maximum is
508.5mm.
Board Length This parameter is used to set the default values for the board stop position in
the X direction, the paste dispensing area and the AutoFlex reset columns. The
maximum value depends on the type of stencil selected.
NOTE
With the remote board stop fitted the minimum is 130mm and the maximum is
508mm. With the large board option the maximum is 620mm, although boards
of 644mm can be loaded.
Board Thickness This parameter is used by the machine to set correct vision and print heights.
Front Print Speed This parameter sets the speed across the stencil when printing.
NOTE
While Fast Print Speed is licensed and enabled the maximum speed is 300mm/
sec. If ProFlow is fitted this parameter is not available while Advanced ProFlow
is enabled. This is also the knead speed if ProFlow is fitted and Advanced
ProFlow is disabled.
Minimum Maximum Increment
50.0mm 265 508.0mm 0.1mm
255 432.0mm
249 330.0mm
Fuji 460.0mm
Sanyo 284.0mm
Heraeus 344.0mm
Minimum Maximum Increment
40.0mm 265 510.0mm 0.1mm
255 460.0mm
249 430.0mm
Fuji 460.0mm
Sanyo 420.0mm
Heraeus 344.0mm
Minimum Maximum Increment
0.20mm 6.00mm 0.1mm
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 10.0mm/sec