Printer 600 Machine Programming.pdf - 第57页
0$&+,1 (352*5$0 0,1* 67$*( ()250 )/(;722/,1* Software Version 07SP04 User Manual 1.57 length in th e X axis. 33. Press the operat or switch on the front o f the machine covers. 34. W a it until th e pneumatic …
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
1.56 User Manual Software Version 07SP04
The following window and menu bar is displayed:
28.Select Continue (F1). The message ‘Table at Contact Height. Check
Tooling Clearance’ is displayed.
29.Select Open Cover (F7).
30.Either:
a. Open the front printhead cover.
or
b. Raise the printhead shutter.
31.Place the FormFlex setup plate centrally over the tooling modules and rails
and place the weights on top of the setup plate.
32.Align the weights along the centre line in the Y axis and one third of the plate
Contact Height Warning
WARNING Check for obstructions between
the Rails and the Screen
Continue
Open
Cover
Exit
Continue
Open
Cover
Exit
Vision
Height
Open
Cover
Exit
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
Software Version 07SP04 User Manual 1.57
length in the X axis.
33.Press the operator switch on the front of the machine covers.
34.Wait until the pneumatic indicator on the front cover displays green.
35.Remove the weights and the FormFlex setup plate from the tooling area.
36.Either:
a. Close the front printhead cover.
or
b. Lower the printhead shutter.
37.Press the System button.
C/L
1/3
1/3
BoardSetup Plate Weight (in 2 positions)
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
1.58 User Manual Software Version 07SP04
38.Select Exit (F8).
39.Select Exit (F8).
The following window and menu bar is displayed:
40.Select Continue (F1).
41.Select Auto Board (F1). The message ‘Board on rails, remove and
continue’ is displayed.
42.Remove the board from the rails.
43.Select Continue (F1).
44.Either:
a. Open the front printhead cover.
or
b. Raise the printhead shutter and lower the drop down panel.
45.To adjust the width of the chase rails to accommodate the stencil for the
product file loaded, carry out the following (ASM only):
Exit
Vision
Height
Open
Cover
Exit
Leaving Generic Tooling
WARNING You are about to return
to the Setup Page
Clear all tooling setup
equipment before proceeding
Continue Exit
Continue Exit
Auto
Board
Manual
Board
Continue
Open
Cover