Printer 600 Machine Programming.pdf - 第68页
0$&+,1( 352*5$00 ,1* 67$*(( )250)/(; 722/,1* 1.68 User Manual Software Ve rsion 07SP04 40. W a it until th e pneumatic indicat or on the front cover di splays gre en 41. Select Exit (F8). 42. Select Exit (F8).…
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
Software Version 07SP04 User Manual 1.67
36.Select Vision Height (F3). The message ‘Table at Vision Height. Check
Tooling Clearance’ is displayed.
37.Select Contact Height (F3).
The following window and menu bar are displayed:
38.Select Continue (F1). The message ‘Table at Contact Height. Check
Tooling Clearance.’ is displayed.
39.Press the operator switch on the front of the machine covers.
Unload
Vision
Height
Home
Height
Board
Clamps
Change
Screen
Open
Cover
Exit
Contact
Height
Tra nspr t
Height
Change
Screen
Open
Cover
Exit
Contact Height Warning
WARNING Check for obstructions between
the Rails and the Screen
Continue
Open
Cover
Exit
Continue
Open
Cover
Exit
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
1.68 User Manual Software Version 07SP04
40.Wait until the pneumatic indicator on the front cover displays green
41.Select Exit (F8).
42.Select Exit (F8).
The following window and menu bar is displayed:
43.Select Continue (F1).
44.Select Auto Board (F1). The message ‘Board on rails, remove and
continue’ is displayed.
45.Remove the board from the rails.
46.Select Continue (F1).
Exit
Vision
Height
Open
Cover
Exit
Leaving Generic Tooling
WARNING You are about to return
to the Setup Page
Clear all tooling setup
equipment before proceeding
Continue Cancel
Continue Cancel
Auto
Board
Manual
Board
Continue
Open
Cover
0$&+,1(352*5$00,1*
67$*(()250)/(;722/,1*
Software Version 07SP04 User Manual 1.69
47.Select Change Screen (F5).
48.Either:
a. Open the front printhead cover.
or
b. Raise the printhead shutter and lower the drop down panel.
49.If fitted, toggle screen clamp switch to up position (off).
50.Remove the screen from the printer and release the universal set plate from
the screen.
51.Ensuring correct orientation, refit the screen
52.If fitted, toggle screen clamp switch to down position (on).
53.Either:
a. Close the front printhead cover.
or
b. Raise the drop down panel and lower the printhead shutter.
54.Press the System button.
55.Go to Stage 6.
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tool ing
Change
Language
Exit