Printer 600 Machine Programming.pdf - 第95页

0$&+,1 (352*5$0 0,1* 0(18 3$5 $0( 7(5 6 Software Version 07SP04 User Manual 1.95 stencil t ype sel ected. NOTE With the r emote board stop fitte d the minimum is 1 19mm and the maximum is 508.5mm. Board Length This…

100%1 / 128
0$&+,1(352*5$00,1*
0(183$5$0(7(56
1.94 User Manual Software Version 07SP04
NOTE
This parameter is not displayed, if Screen Size in Set Preferences has been
selected to Screen Library.
Print Area Length This is the maximum printable distance in the Y direction, ie the maximum
distance the squeegee can travel, front to back.
NOTE
This parameter field only appears if Custom Screen has been selected.
Print Area Width This is the maximum length of squeegee that could be fitted to the printer, taking
into account stencil frame and the amount of mesh surrounding the mask. This
is also the maximum length of paste that can be dispensed.
NOTE
This parameter field only appears if Custom Screen has been selected.
Distance to Image The meaning of this parameter varies, depending on whether an image is centre
or edge justified. For centre justified images, the dimension is the distance from
the outside rear of the stencil frame to the centre of the image plus half the board
width. For edge justified images, the dimension is the distance from the outside
rear of the stencil frame to the front edge of the board.
NOTE
This parameter field only appears if Custom Screen has been selected.
Board Width This parameter sets the rail width for this particular product. It is also used to
set a default value for the print stroke, the clean screen, the board stop position
in the Y direction and the AutoFlex rows. The maximum value depends on the
Options Available
Enabled
Disabled
Minimum Maximum Increment
100.0mm 508.5mm 0.1mm
Minimum Maximum Increment
100.0mm 510.0mm 0.1mm
Minimum Maximum Increment
306.0mm 645.0mm 0.1mm
0$&+,1(352*5$00,1*
0(183$5$0(7(56
Software Version 07SP04 User Manual 1.95
stencil type selected.
NOTE
With the remote board stop fitted the minimum is 119mm and the maximum is
508.5mm.
Board Length This parameter is used to set the default values for the board stop position in
the X direction, the paste dispensing area and the AutoFlex reset columns. The
maximum value depends on the type of stencil selected.
NOTE
With the remote board stop fitted the minimum is 130mm and the maximum is
508mm. With the large board option the maximum is 620mm, although boards
of 644mm can be loaded.
Board Thickness This parameter is used by the machine to set correct vision and print heights.
Front Print Speed This parameter sets the speed across the stencil when printing.
NOTE
While Fast Print Speed is licensed and enabled the maximum speed is 300mm/
sec. If ProFlow is fitted this parameter is not available while Advanced ProFlow
is enabled. This is also the knead speed if ProFlow is fitted and Advanced
ProFlow is disabled.
Minimum Maximum Increment
50.0mm 265 508.0mm 0.1mm
255 432.0mm
249 330.0mm
Fuji 460.0mm
Sanyo 284.0mm
Heraeus 344.0mm
Minimum Maximum Increment
40.0mm 265 510.0mm 0.1mm
255 460.0mm
249 430.0mm
Fuji 460.0mm
Sanyo 420.0mm
Heraeus 344.0mm
Minimum Maximum Increment
0.20mm 6.00mm 0.1mm
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 10.0mm/sec
0$&+,1(352*5$00,1*
0(183$5$0(7(56
1.96 User Manual Software Version 07SP04
Rear Print Speed This parameter sets the speed across the stencil when printing.
NOTE
While Fast Print Speed is licensed and enabled the maximum speed is 300mm/
sec. If ProFlow is fitted this parameter is not available while Advanced ProFlow
is enabled. This is also the knead speed if ProFlow is fitted and Advanced
ProFlow is disabled.
Flood Speed This Parameter sets the flood blade speed across the stencil when performing
a flood stroke.
NOTE
While Fast Print Speed is licensed and enabled the maximum speed is 300mm/
sec. This parameter is not available while ProFlow is fitted.
FWD Start Speed This parameter sets the start speed of the forward print stroke. The transition
between start and stop speeds is linear with repect to time.
NOTE
While Fast Print Speed is licensed and enabled the maximum speed is 300mm/
sec. This parameter is only available while ProFlow is fitted and Advanced
ProFlow is enabled. This is also the knead speed if ProFlow is fitted and
Advanced ProFlow is enabled.
FWD End Speed This parameter sets the end speed of the forward print stroke. The transition
between start and stop speeds is linear with repect to time.
NOTE
While Fast Print Speed is licensed and enabled the maximum speed is 300mm/
sec. This parameter is only available while ProFlow is fitted and Advanced
ProFlow is enabled. This is also the knead speed if ProFlow is fitted and
Advanced ProFlow is enabled.
RWD Start Speed This parameter sets the start speed of the rearward print stroke. The transition
between start and stop speeds is liear with repect to time.
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 10.0mm/sec
Minimum Maximum Increment
10.0mm/sec 150.0mm/sec 1.0mm/sec
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 100.0mm/sec
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 100.0mm/sec
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 100.0mm/sec