OM-1076-001.pdf - 第10页

3. Retrieval of Standard Component ID T o place components on a PCB, the IDs of the components to be placed must be set up in the pattern program. It is also required to check if the components to be placed are regis- te…

• Composition of Component Library

Component Library

Component IDs

Identification Data

Common Component Data Control Data

Carrier Data

Component Library Data

Shape Data

Individual Component Data

Recognition Data

• Explanation of Each Data

Table A2

Data Items Reference

Identification Data Section 2 A01 Identification Data

Control Data Section 2 A02 Control Data

Carrier Data Section 2 A03 Carrier Data

Shape Data Section 2 B01 Shape Data

Recognition Data Section 2 B02 Recognition Data

• The component library data can be created using the network termi-

nal (option) or the main machine.

0107-001 1-2 Tg0502-PM-CL

2. Component IDs and Component Library Data

Fig. A2 Composition of Component Library

3. Retrieval of Standard Component ID

To place components on a PCB, the IDs of the components to be placed

must be set up in the pattern program.

It is also required to check if the components to be placed are regis-

tered as standard component IDs through retrieval operation. Refer to

another instruction manual "Component Library Data (TIM-X Series)"

for details.

Retrieval of Standard Component IDs

(a) Before performing the retrieval operation,

the following information should be ob-

tained in advance from approval draw-

ings, a catalog, actual components, etc.

• Component Makers and Names

• Serial Nos. and Package Names Speci-

fied by Component Makers

(b) Refer to the instruction manual "Compo-

nent Library Data (TIM-X Series)" for how

to retrieve component IDs.

Registered Use the pertinent standard component IDs.

Not Registered Create new component library data.

Refer to "Section 4 Creation of New Compo-

nent Library" for details.

3. Retrieval of Standard Component ID

0107-001 1-3 Tg0502-PM-CL

4. Classification of Component Shapes

Component shapes are classified to distinguish each component library

data group.

4.1 Leadless Components

Table A3

Component Shapes Applicable Components for Reference

Cylindrical

Square

Deform Simple Shape

Complex Shape

4. Classification of Component Shapes

0107-001 1-4 Tg0502-PM-CL

• Cylindrical Components

Resistors, Capacitors, Diodes, and other

similar-shaped components

• Square Components

Resistors, Film Capacitors, Coils, Chip

Ceramic Filters, and other similar-shaped

components

• Deform Components

Tantalum Capacitors, Semi-Fixed

Variable Resistors, Aluminum Electro-

lytic Capacitors, Trimmer Capacitors,

and other similar-shaped components

• Special Components

(Components have three linear edges

or more)

Such as some battery and shielded

cases, etc.

Fig. A3

Fig. A4

Fig. A5

Fig. A6