OM-1076-001.pdf - 第165页

2.2 T ypical Example of Each Component 0107-001 4-8 Tg0502-PM-CL Connector Components Other Leaded Components BGA/CSP Components Fig. D13 Connectors for FFC/FPC Fig. D14 Min-Mold T ransistors Fig. D15 Mini-Power T ransis…

2.2 Typical Example of Each Component

Cylindrical Components

Square Components

Deform Components

IC Components

2.2 Typical Example of Each Component

0107-001 4-7 Tg0502-PM-CL

Fig. D7 Semi-Fixed Variable

Resistors

Fig. D8 Aluminum Electrolytic

Capacitors

Fig. D5 Resistors, Capacitors, Diodes, etc.

Fig. D6 Resistors, Laminated Capacitors,

Coils, Chip Ceramic Filters, etc.

Fig. D9 SOP Fig. D10 QFP

Fig. D11 PLCC Fig. D12 SOJ

2.2 Typical Example of Each Component

0107-001 4-8 Tg0502-PM-CL

Connector Components

Other Leaded Components

BGA/CSP Components

Fig. D13 Connectors for FFC/FPC

Fig. D14 Min-Mold Transistors Fig. D15 Mini-Power Transistors

Fig. D16 LED Fig. D17 Coil

Fig. D18 IC Fig. D19 IC

3. Measurement of Component Dimensions

Component dimensions must be measured according to the recognized

shape of each component.

Fill in the measured values on the individual data sheets.

(a) The measured values (dimensions) can be referred to when similar-

shaped components must be selected from the standard component

library.

(b) The measured values can also be referred to when new component

library must be created.

3.1 Leadless Components

3.1.1 Cylindrical Components

Measures the dimensions (*1 through *10) in the figures.

(1), (2), (3), and (4) in the figure correspond relatively to "Corner 1", "Cor-

ner 2", "Corner 3", and "Corner 4" in the corner data.

Individual Data Sheet (Cylindrical)

Minimum Unit: 0.01 mm

*1 Mold Size X (Horizontal)

*2 Mold Size Y (Vertical)

*3 Corner 1 Dim X

*4 Corner 1 Dim Y

*5 Corner 2 Dim X

*6 Corner 2 Dim Y

*7 Corner 3 Dim X

*8 Corner 3 Dim Y

*9 Corner 4 Dim X

*10 Corner 4 Dim Y

3. Measurement of Component Dimensions

0107-001 4-9 Tg0502-PM-CL

Fig. D20