OM-1076-001.pdf - 第117页
0206-001 2-88-2 Tg0502-PM-CL B02 Recognition Data (B02_03) (c) Automatically Specified Parameters as Algorithm for Mul- tiple Pin Lead When "Auto" is selected in the "Recognition data set" text box or…
0206-002 2-88-1 Tg0502-PM-CL
B02 Recognition Data (B02_03)
This mode is effective
when the lead ends are
not shaped rectangle.
This is effective for the
components having
rectangular electrodes
(QFN, etc.).
This is effective for the
components having
deform electrodes.
This is effective when the
lead ends are not shaped
rectangle.
This is effective for the
components having
rectangular electrodes.
This is effective for the
components having
deform electrodes.
Multiple
Pin Lead
(General
Purpose)
Leaded
Compo-
nents(IC)
(Connector)
(Other
Leaded)
Multiple
Pin Lead
(Stan-
dard)
The coarse recognition
mode (for specially
shaped leads) must be
used.
Use the coarse recogni-
tion mode for electrodes.
(The tilting of individual
electrodes is checked.)
Use the coarse recogni-
tion mode for electrodes.
(The tilting of individual
electrodes is not
checked.)
Use the coarse recogni-
tion mode for ordinary
leads.
It is reinforced to check
whether or not the leads
are located at the edges
for coarse recognition.
The coarse recognition
mode (for specially
shaped leads) must be
used.
The combination of
Recognition Levels 2 and
11 is applied.
Use the coarse recogni-
tion mode for electrodes.
(The tilting of individual
electrodes is checked.)
Use the coarse recogni-
tion mode for electrodes.
(The tilting of individual
electrodes is not
checked.)
Use the coarse recogni-
tion mode for ordinary
leads.
11
21
28
31
2
11
12
21
28
31
Table B19-4
Component
Algorithm
Recognition
Description Sample Application
Shape
Level
0206-001 2-88-2 Tg0502-PM-CL
B02 Recognition Data (B02_03)
(c) Automatically Specified Parameters as Algorithm for Mul-
tiple Pin Lead
When "Auto" is selected in the "Recognition data set" text
box or "1" in the "Recognition level" text box, the coarse
recognition mode becomes as shown in the table below.
Table B19-5
Component Shape
Lead Type
Coarse
Remarks
Recognition Mode
IC Leadless Electrodes Components This is equivalent to
Components "Recognition Level = 21".
Components Ordinary Leaded This is equivalent to
other than the Components "Recognition Level = 31".
above
Connectors Electrodes Electrodes Components This is equivalent to
Components "Recognition Level = 21".
Components Ordinary Leaded This is equivalent to
other than the Components "Recognition Level = 31".
above
Others Electrodes Electrodes Components This is equivalent to
Components "Recognition Level = 21".
Components Ordinary Leaded This is equivalent to
other than the Components "Recognition Level = 31".
above
0206-001 2-88-3 Tg0502-PM-CL
B02 Recognition Data (B02_04)
(B02_04) Back Ltg Recog Algo or Front Ltg Recog Algo
Set a recognition system.
Select one of the following options according to the component shape
and the lighting mode.
Auto : Each condition of the component data is con-
sidered and one of the shadowed recognition
systems in the table is selected.
Corner : The corner of the mold is detected.
Example: Cylindrical and Square Components,
etc.
Edge (General Purpose):
The edge of the mold is detected.
Example: General Leadless Components
CG (Angle Detected):
The area center of gravity is detected for the
entire component image.
Example: Special Components Angle is de-
tected. This angle shows the inclina-
tion degree of the long axis for the
entire component image.
CG (No Angle): The center of gravity is detected for the entire
component image.
Example: Special Components Angle is not de-
tected. The angle correction is zero
regardless of component posture.
Edge (Rectangle): This is a edge detection system used exclu-
sively for the front recognition of rectangular
microcomponents.
Example: Rectangular Microcomponents
Line : Straight Line Edge is detected.
Example: Shield Case, etc.
Lead : This is a lead detection system used for small
components (components for small view) and
components with a small number of leads.
Example: Transistors, Diodes, SOP, etc.
Fig. B191
Back ltg recog algo
Corner