00196962-04-BA-SX12-V2-EN.pdf - 第95页
User manual SIPLACE SX1/SX2 3 Technical data and assemblies From software version SC 706.1 SP1 Version 10/2014 3.1 Performance data for SIPLACE SX1/SX2 95 3.1.3 PCB conveyor - dat a 3 Single convey or Flexible dual conv …
3 Technical data and assemblies User manual SIPLACE SX1/SX2
3.1 Performance data for SIPLACE SX1/SX2 From software version SC 706.1 SP1 Version 10/2014
94
3.1.2 Placement head - data
3
Component range
*a
0.4 mm x 0.2 mm to max. 200 mm x 125 mm
Component height C&P20 4 mm
CPP
*b
6 mm
CPP
*c
8.5 mm to 11.5 mm
TH 25 mm (greater height on request)
X/Y accuracy
*d
C&P20 ± 41 μm (3σ), ± 55 μm (4σ) Component camera, type 23 (6 x 6)
C&P20 ± 41 μm (3σ), ± 55 μm (4σ) Component camera, type 41 (6 x 6)
CPP ± 41 μm (3σ), ± 55 μm (4σ) Component camera, type 30 (27 x 27)
CPP ± 34 μm (3σ), ± 45 μm (4σ) Component camera, type 33 (55 x 45)
TH ± 26 μm (3σ), ± 35 μm (4σ) Component camera, type 33 (55 x 45)
TH ± 22 μm (3σ), ± 30 μm (4σ) Component camera, type 25 (16 x 16)
Angular accuracy C&P20 ± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 23 (6 x 6)
C&P20 ± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 41 (6 x 6)
CPP
*e
± 0.4° (3σ), ± 0.5° (4σ) Component camera, type 30 (27 x 27)
CPP
*f
± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 30 (27 x 27)
CPP ± 0.2° (3σ), ± 0.3° (4σ) Component camera, type 33 (55 x 45)
CPP
*g
± 0.4° (3σ), ± 0.5° (4σ) Component camera, type 30 (27 x 27)
TH ± 0.05° (3σ), ± 0.07° (4σ) Component camera, type 33 (55 x 45)
TH ± 0.05° (3σ), ± 0.07° (4σ) Component camera, type 25 (16 x 16)
*)a Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards,
the component packaging tolerances and the component tolerances.
*)b CPP head: in low installation position (stationary component camera not possible).
*)c CPP head: in high installation position
*)d The accuracy value, measured using the vendor-neutral IPC standard.
*)e Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
*)f Component dimensions smaller than 6 mm x 6 mm.
*)g Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
User manual SIPLACE SX1/SX2 3 Technical data and assemblies
From software version SC 706.1 SP1 Version 10/2014 3.1 Performance data for SIPLACE SX1/SX2
95
3.1.3 PCB conveyor - data
3
Single conveyor Flexible dual conveyor Dual conveyor in single con-
veyor mode
Standard dimensions
(length x width)
50 mm x 50 mm to
450 mm x 560 mm
*a
50 mm x 50 mm to
450 mm x 260 mm
50 mm x 50 mm to
450 mm x 460 mm
Dimensions with “Long
Board”option
(length x width)
50 mm x 50 mm to
850 mm x 560 mm
50 mm x 50 mm to
850 mm x 260 mm
50 mm x 50 mm to
850 mm x 460 mm
Stationary conveyor side Right, left or outer
Automatic electrical
width adjustment
Standard
PCB thickness
Standard:
"Thick board" option
0.3 mm to 4.5 mm
2.0 mm to 6.5 mm
Clamping length of board 450 mm
Space for positioning
support pins
440 mm
PCB warpage See page 135
PCB weight
*b
Standard max. 2.0 kg max. 1.0 kg max. 2.0 kg
Clearance on PCB under-
side
*c
25 mm
PCB conveyor height
Option:
Standard:
SMEMA option:
900 mm
930 mm
950 mm
Type of interface:
Standard:
Option:
SMEMA
Siemens
Component-free PCB
handling edge
3.0 mm
PCB changeover time
Single conveyor
Dual conveyor
*d
< 1.5 seconds
0 seconds
*)a When using board widths > 450 mm, make sure that the peripheral modules can also process these board
widths.
*)b The board weight value refers to the weight of the board plus the weight of the components.
*)c The free positioning of support pins is limited by the stop bar.
*)d 0 seconds in asynchronous mode, otherwise 1.5 seconds.
Important notes
When setting up a machine (S; F-, HS-, HF-, X- or D-Series) next to a SIPLACE SX, be aware that there is limited room between the two
machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the two machines.
3 Technical data and assemblies User manual SIPLACE SX1/SX2
3.1 Performance data for SIPLACE SX1/SX2 From software version SC 706.1 SP1 Version 10/2014
96
3.1.4 Component feeding
3
3
Feeder locations
Component trolley with 60 tracks
Component trolley with 30 tracks
60 feeders with 8 mm
30 feeders with 8 mm
Component trolley changeover time < 1 minute
Max. component feeding
(2 component trolleys on the SIPLACE SX)
2 component trolleys with tape reel holder and
integral waste tape bins:
When using a waffle pack changer:
120 locations for feeders with 8 mm.
90 locations for feeders with 8 mm.
Feeder module types (SIPLACE X) Tape feeder modules, tray feeders (with X reject - conveyor
adapter),
linear vibratory feeders and label feeders.
feeding capacity
(2 component trolleys on the SIPLACE SX)
120 tape feeder modules 4 mm X
120 tape feeder modules 8 mm X
60 tape feeder modules Smart Feeder 2x8 mm X
60 tape feeder modules, Smart Feeder 12 mm X
60 tape feeder modules, Smart Feeder 16 mm X
40 tape feeder modules 24 mm X
30 tape feeder modules 32 mm X
24 tape feeder modules 44 mm X
20 tape feeder modules 56 mm X
16 tape feeder modules 72 mm X
12 tape feeder modules 88 mm X