QP132三级参考手册.pdf.pdf - 第98页
Chapter 8 In Shifter
Notes:
Chapter 7 7.2 Training Evaluation
Edition 1.0 7-4 QP-132 Level 3 Tutorial
Chapter 8
In Shifter
8.1 In Shifter Adjustment
Required Jigs: Jig
(CGPJ0020)
8.1.1 Pallet 10 mm Shift
1. Adjust the speed controllers.
10 mm shift cylinder : (1) 4 turns from the fully closed
position
: (2) 1.75 turns from the fully
closed position
• Pallet clamp cylinder : Fully open
• Pallet unclamp cylinder : Not controlled
• SS-rail cylinder with pin : Fully open
• SS-rail cylinder without pin : Fully open
2. Press [SET] → [MANUAL] → [I/O] → [STANDARD I/O] → [OUTPUT]
and turn on Y04A P.IN PLT FWD to advance the IN-pallet shift cylinder.
3. Move the SS-axis to the SS0 position.
4. Turn on Y062 SS PIN ON to advance the SS-pin and clamp a jig
(CGPJ0020) on the IN- pallet loader.
(1)
(2)
QP132T8001
10 mm shift cylinder
Adj. bolt
Jig
SS rail
Adjust the bolt so
that cylinder is in
contact with jig.
Chapter 8 8.1 In Shifter Adjustment
Edition 1.1 8-1 QP-132 Level 3 Tutorial