3OM-1064-001.pdf - 第167页
0005-002 2-108 Tg0248-PM-ER Error Code Display A Display B 3. T rouble Shooting after Error Display 69 01 08 NOZZLE A TT ACH NOZZLE STOCKER A2 NOT CLOSED COMPLETEL Y WITHIN SPECIFIED TIME. (Cause 1) This is the device’ s…
0005-002 2-107 Tg0248-PM-ER
Error Code Display A Display B
3. Trouble Shooting after Error Display
69 01 04 NOZZLE ATTACH NOZZLE NOT ATTACHED.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
69 01 03 NOZZLE ATTACH NOZZLE STOCKER B1 NOT OPENED COMPLETELY
WITHIN SPECIFIED TIME.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can't be re-started, contact our service personnel.
69 01 02 NOZZLE ATTACH NOZZLE STOCKER A2 NOT OPENED COMPLETELY
WITHIN SPECIFIED TIME.
(Cause 1) The nozzle stocker offset may not be within the correct range.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
69 01 01 NOZZLE ATTACH NOZZLE STOCKER A1 NOT OPENED COMPLETELY
WITHIN SPECIFIED TIME.
(Cause 1) The nozzle stocker offset may not be within the correct range.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
0005-002 2-108 Tg0248-PM-ER
Error Code Display A Display B
3. Trouble Shooting after Error Display
69 01 08 NOZZLE ATTACH NOZZLE STOCKER A2 NOT CLOSED COMPLETELY
WITHIN SPECIFIED TIME.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
69 01 07 NOZZLE ATTACH NOZZLE STOCKER A1 NOT CLOSED COMPLETELY
WITHIN SPECIFIED TIME.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
69 01 06 NOZZLE ATTACH SHORT NOZZLE DESIGNATED BUT LONG NOZZLE
ATTACHED.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
69 01 05 NOZZLE ATTACH LONG NOZZLE DESIGNATED BUT SHORT NOZZLE
ATTACHED.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
0005-002 2-109 Tg0248-PM-ER
Error Code Display A Display B
3. Trouble Shooting after Error Display
69 02 01 NOZZLE STORE NOZZLE STOCKER A1 NOT OPENED COMPLETELY
WITHIN SPECIFIED TIME.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
69 01 0B NOZZLE ATTACH NOZZLE STOCKER B2 NOT CLOSED COMPLETELY
WITHIN SPECIFIED TIME.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
69 01 0A NOZZLE ATTACH NOZZLE STOCKER B2 NOT OPENED COMPLETELY
WITHIN SPECIFIED TIME.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
69 01 09 NOZZLE ATTACH NOZZLE STOCKER B1 NOT CLOSED COMPLETELY
WITHIN SPECIFIED TIME.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.