3OM-1064-001.pdf - 第234页

5. Component Recognition Error Code and List of Error Messages 0103-003 4-38 Tg0248-PM-ER Error Code Display A Display B 2022A210 ELECTRI CAL CONT ACT to 219 PITCH Note : A represents “2” or “3”. PITCH OF ELCTC.1 AND ELC…

100%1 / 308
5. Component Recognition Error Code and List of Error Messages
Error Code Display A Display B
2021A110 ELECTRICAL CONTACT SIZE
to 119 ERROR
Note: A represents “2” or “3”.
WIDTH OF ELECTRICAL CONTACT 1 (UPPER) EX-
CEEDS THE TOLERANCE.
2021A120 ELECTRICAL CONTACT SIZE
to 129 ERROR
Note: A represents “2” or “3”.
WIDTH OF ELECTRICAL CONTACT 2 (UPPER) EX-
CEEDS THE TOLERANCE.
2021A210 ELECTRICAL CONTACT SIZE
to 219 ERROR
Note: A represents “2” or “3”.
WIDTH OF ELECTRICAL CONTACT 1 (LEFT) EXCEEDS
THE TOLERANCE.
2021A220 ELECTRICAL CONTACT SIZE
to 229 ERROR
Note: A represents “2” or “3”.
WIDTH OF ELECTRICAL CONTACT 2 (LEFT) EXCEEDS
THE TOLERANCE.
2021A230 ELECTRICAL CONTACT SIZE
to 239 ERROR
Note: A represents “2” or “3”.
WIDTH OF ELECTRICAL CONTACT 3 (LEFT) EXCEEDS
THE TOLERANCE.
2021A130 ELECTRICAL CONTACT SIZE
to 139 ERROR
Note: A represents “2” or “3”.
WIDTH OF ELECTRICAL CONTACT 3 (UPPER) EX-
CEEDS THE TOLERANCE.
2021A310 ELECTRICAL CONTACT SIZE
to 319 ERROR
Note: A represents “2” or “3”.
WIDTH OF ELECTRICAL CONTACT 1 (LOWER) EX-
CEEDS THE TOLERANCE.
2021A320 ELECTRICAL CONTACT SIZE
to 329 ERROR
Note: A represents “2” or “3”.
2021A410 ELECTRICAL CONTACT SIZE
to 419 ERROR
Note: A represents “2” or “3”.
WIDTH OF ELECTRICAL CONTACT 1 (RIGHT) EX-
CEEDS THE TOLERANCE.
2021A420 ELECTRICAL CONTACT SIZE
to 429 ERROR
Note: A represents “2” or “3”.
WIDTH OF ELECTRICAL CONTACT 2 (RIGHT) EX-
CEEDS THE TOLERANCE.
WIDTH OF ELECTRICAL CONTACT 3 (RIGHT) EX-
CEEDS THE TOLERANCE.
2021A330 ELECTRICAL CONTACT SIZE
to 339 ERROR
Note: A represents “2” or “3”.
WIDTH OF ELECTRICAL CONTACT 3 (LOWER) EX-
CEEDS THE TOLERANCE.
2021A430 ELECTRICAL CONTACT SIZE
to 439 ERROR
Note: A represents “2” or “3”.
(Cause 1) Is the electrical contact size data on the component library correct?
(It can be checked in the component recognition test).
(Cause 2) Is the Electrical Contact Size Tolerance too small?
The Electrical Contact Size Tolerance becomes valid only when the “Recognition
Data” and “Electrical Contact Size Tolerance” are set manually.
(Cause 3) Is there any improper electric contact in the electric contact array?
(Reset Procedure in the case of Causes 1, 2 and 3)
Reset Procedure
(1) Press the [ZERO] button to return all the axes to their original positions.
(2) Re-start.
(3) If the device can’t be re-started, contact our service personnel.
WIDTH OF ELECTRICAL CONTACT 2 (LOWER) EX-
CEEDS THE TOLERANCE.
0103-003 4-37 Tg0248-PM-ER
5. Component Recognition Error Code and List of Error Messages
0103-003 4-38 Tg0248-PM-ER
Error Code Display A Display B
2022A210 ELECTRICAL CONTACT
to 219 PITCH
Note: A represents “2” or “3”.
PITCH OF ELCTC.1 AND ELCTC.3 EXCEEDS THE TOL-
ERANCE.
(Cause 1) Is the electrical contact position data in the component library correct?
(It can be checked in the component recognition test).
(Cause 2) Is the Component Size Tolerance too small?
The Component Size Tolerance becomes valid only when the “Recognition Data” and
“Component Size Tolerance” are set manually.
(Reset Procedure in the case of Causes 1 and 2)
Reset Procedure
(1) Press the [ZERO] button to return all the axes to their original positions.
(2) Re-start.
(3) If the device can’t be re-started, contact our service personnel.
2022A110 ELECTRICAL CONTACT
to 119 PITCH
Note: A represents “2” or “3”.
PITCH OF ELCTC.1 AND ELCTC.2 EXCEEDS THE TOL-
ERANCE.
5. Component Recognition Error Code and List of Error Messages
0103-001 4-38-1 Tg0248-PM-ER
Error Code Display A Display B
20233110 ELECTRICAL CONTACT ARRAY
to 119 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.1 (UPPER) EX-
CEEDS THE TOLERANCE.
20233120 ELECTRICAL CONTACT ARRAY
to 129 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.2 (UPPER) EX-
CEEDS THE TOLERANCE.
20233210 ELECTRICAL CONTACT ARRAY
to 219 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.1 (LEFT) EX-
CEEDS THE TOLERANCE.
20233220 ELECTRICAL CONTACT ARRAY
to 229 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.2 (LEFT) EX-
CEEDS THE TOLERANCE.
20233230 ELECTRICAL CONTACT ARRAY
to 239 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.3 (LEFT) EX-
CEEDS THE TOLERANCE.
20233130 ELECTRICAL CONTACT ARRAY
to 139 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.3 (UPPER) EX-
CEEDS THE TOLERANCE.
20233320 ELECTRICAL CONTACT ARRAY
to 329 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.2 (LOWER) EX-
CEEDS THE TOLERANCE.
20233310 ELECTRICAL CONTACT ARRAY
to 319 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.1 (LOWER) EX-
CEEDS THE TOLERANCE.
20233330 ELECTRICAL CONTACT ARRAY
to 339 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.3 (LOWER) EX-
CEEDS THE TOLERANCE.
20233410 ELECTRICAL CONTACT ARRAY
to 419 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.1 (RIGHT) EX-
CEEDS THE TOLERANCE.
20233420 ELECTRICAL CONTACT ARRAY
to 429 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.2 (RIGHT) EX-
CEEDS THE TOLERANCE.
20233430 ELECTRICAL CONTACT ARRAY
to 439 DIRECTION BEND ERROR
ELCTC. ARRAY DIR.BEND OF ELCTC.3 (RIGHT) EX-
CEEDS THE TOLERANCE.
(Cause 1) Is the electrical contact position X or Y correct?
(Cause 2) Is the electrical contact bent?
(Cause 3) Is the component size tolerance too small?
(Reset Procedure in the case of Causes 1, 2 and 3)
Reset Procedure
(1) Press the [ZERO] button to return all the axes to their original positions.
(2) Re-start.
(3) If the device can’t be re-started, contact our service personnel.