DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第205页

7-41 Part Registration 7.1.2. CHIP com ponent data setting 7.1.2.1. CHIP-Circle co mponent data setting Set the align data for ci rcle CHIP components. Figure7.12 “Package Group =CH IP-Circle” dialog box  <Camera No.…

7-40

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

 Light Level

Displays the current light level.

 Image Capture Range

Displays the range and interval of the light level change to be used for saving the

image. If the light level range is set as User Define, the user can directly enter and

correct the range.

 From

Displays the starting level of the light level change.

 To

Displays the finishing level of the light level change.

 Increment

Sets the interval of the light level change.

 <Start> button

Starts image capture.

 <Cancel> button

Stops image capture.

 <Close> button

Closes the dialog box.

7-41

Part Registration

7.1.2. CHIP component data setting

7.1.2.1. CHIP-Circle component data setting

Set the align data for circle CHIP components.

Figure7.12 “Package Group =CHIP-Circle” dialog box

 <Camera No.> combo box

Select the camera to recognize the component. Please refer to “7.1.1 Common Align

Data” for more information.

 button

Select the light for the camera to recognize the component. Please refer to“7.1.1

Common Align Data” for more information.

 <Size> group

Set the align size.

 <Body X> edit box

Enter the diameter of the component.

For other setups, please refer to “7.1.1 Common Align Data”.

 <Option> group

Set the Option data among Align data related to part recognition.

 <Use LED flip check> check box

This is selected to use the function that checks the turnover of the LED. For more

details, refer the “<Detail> Button” of “7.1.2.2CHIP-Rect component data

setting”.

7-42

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

7.1.2.2. CHIP-Rect component data setting

Set the align data for rectangular CHIP components.

Figure7.13 “Package Group =CHIP-Rect” dialog box

 <Camera No.> combo box

Select the camera to recognize the component. Please refer to “7.1.1 Common Align

Data” for more information.

 button

Select the light for the camera to recognize the component. Please refer to “7.1.1

Common Align Data” for more information.

 <Size> group

Set the align size.

 <Body X> edit box

Set the component size in X direction.

 <Body Y> edit box

Set the component size in Y direction.

 <Lead W> edit box

Set the length of lead in X direction.

 <Lead L> edit box

Set the length of lead in Y direction.

 <Use Coil Check> check box

Used to recognize the coil type parts that could not be recognized properly