DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第418页
14-36 Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide 7. Select the <Edge Offset> edit box correspon ding to the “Ref. #1 ” and click th e <Move Cam> button. 8. Then the downward came…
14-35
Machine Calibration
5. Click the <Edge Offset Teach…> button
6. .Select the station to be calibrated from the <Stations> combo box.
14-36
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
7. Select the <Edge Offset> edit box corresponding to the “Ref. #1” and click the <Move
Cam> button.
8. Then the downward camera (fiducial camera) moves to the corresponding position of
the fiducial mark. Select XY by pressing the ‘AXIS’ button using the teach box to
make the backup table rise and make the edge of the transport rail frame correspond
with the horizontal line of the cross lines in the vision.
Then select the jog by pressing the ‘MODE’ button, and slowly move by pressing the
Y(+) direction move button.
9. When matched, click the <Get> button.
14-37
Machine Calibration
10. Select the corresponding <Edge Offset> edit box in ‘Ref. #2’ and click the <Move
Cam> button.
11. Perform teaching on ‘Ref. #2’ in the same way as teaching on ‘Ref. #1’.
12. When teaching on the fiducial marks of the selected station is finished, perform
teaching on the fiducial marks of the StationF3 in the same way.
13. After finishing the teaching, click the <Update> button to apply the changed value.