DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第494页
15-28 Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide <T est> button Perform test for the mapping result. Th e light level that does not satisfy the reference value is searched automatica…
15-27
System Setup
<2. Camera> group
Selects the camera for performing lighting brightness test or mapping. Activated
cameras can be designated at the same time.
<3. Tool Setting> group
Performs test or preparation for mapping.
<Prepare Test /Mapping> button
Return all nozzles mounted on the head to each corresponding ANC hole.
Before doing so, arrange the LightFly nozzle, a nozzle for calibration into the
No. 1 hole of the ANC.
If the nozzle arrangement is finished, the <Start> button and <Test> button in
the <Mapping>group.
<4. Search Area> group
Clicking the button corresponding to the light for which mapping is to be
performed will display the following dialog box.
Click on the button corresponding to the illumination for mapping, set the test area
(Area 1 ~ 4) to 16 illumination levels for each lighting, and setup the average
illumination level for each pixel of the test area to the maximum value.
<Mapping> group
button
Select the Map File to be used for mapping. Since the file name is set
automatically, do not change it.
<Start> button
Start the Mapping.
15-28
Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide
<Test> button
Perform test for the mapping result. The light level that does not satisfy the
reference value is searched automatically and it is displayed in the result file.
Perform mapping with the <Refine Mapping Result> check box being selected.
State display
Displays current progressing state.
Camera (Number of camera for which test or mapping is completed) /(Total
number of selected camera)
(I: Inner Level, O: Outer Level, S: Side LevelC: Coaxial Level)
<Close> button
Closes the dialog box.
<Update> button
Transmits the set data to the equipment and closes the dialog box.
<Cancel> button
Ignores the set data and closes the dialog box.
Perform light mapping of the Fly Camera in the following manner:
1. Place the light mapping tool in the No. 1 hole of the ANC.
2. Click the <Light Mapping> button to execute the light mapping dialog box.
15-29
System Setup
3. After selecting the camera for which light mapping is to be performed in the <Select
Camera> group, click the <Mapping/Test> button.
4. Click the <...> button in the <<Mapping>> group to select the file for calibration.
Then select the camera to be calibrated in the <2. Camera> group.