DECAN_S1_Administrator′s_Guide(Eng_Ver1.5)_Print.pdf - 第436页

14-54 Next Generation, Multi-Functional Plac er DECAN S1 Administrator’s Guide Caution Before performing this calibration , be sure to remove the Glass used in the Camera Offset (Gl ass) Calibration from the Fix Camera. …

14-53

Machine Calibration

The measurement result can be confirmed in the Head Offset dialog box.

Memo The reference values for the calibration of the Camera Offset is as

follows.

 Gantry 1

Offset X : -189.5 ~ -187.5 (mm)

Offset Y : -1.0 ~ 1.0 (mm)

 Calibration using Fix Camera Hole (Optional)

This process is performed after calibrating with the Calibration Glass.

This calibration is performed in order to use the “Runtime Calibration” function. The

measured values are not reflected in the system calibration data, but are used only as

data necessary for the “Runtime Calibration” function. Perform calibration only when

the “Runtime Calibration” function is used.

Memo To activate the <9-A. Camera Offset (Hole)> button, the System

Constant setting must be made first. Please contact our CS or local

representative office.

Memo To use the “Runtime Calibration” function, System Constant setting

should first be performed. Please contact our CS or local

representative office.

14-54

Next Generation, Multi-Functional Placer DECAN S1 Administrator’s Guide

Caution Before performing this calibration, be sure to remove the

Glass used in the Camera Offset (Glass) Calibration from

the Fix Camera.

1. Click the <9-A. Camera Offset (Hole)> button.

2. Click the <Next> button.

3. The message “Move To Center Position Of [Fix 1] Camera. To Move,

Click[Next].” appears in the message window.

14-55

Machine Calibration

Click the <Next> button to move the fiducial camera to the fix camera hole

position.

4. Then the message “1. First, Select Move Camera and Adjust Light Level. 2. After

then, Select Fix Camera and Adjust Light Level. 3. To Calibrate, Click [Next].”

appears.

Select "Fid Cam1" in the <Target Camera> combo box and click the <Light ...>

button to adjust the brightness of the lighting so that the Fix Camera Hole shown

in the SM Vision window is clearly visible.

Then, select "Fix Cam1" in the <Target Camera> combo box, and follow the same

procedure as for the fiducial camera.

When you have finished adjusting the brightness of the lighting, click the <Next>

button.