TR7007M_SII_Hardware_en_v1-0-1.pdf - 第82页
Test Research, Inc. 72 TR7007 M SII User Guide – Hardware 9.6.2 EzLINK EzLink is a suite of so ftwa re tools to test if a serial connection is working properly. EzLink is a diagnos tic soft ware tool o ften us ed du ring…
Test Research, Inc.
TR7007M SII User Guide – Hardware 71
Figure 110: Error Codes of X-Y Table Driver
Test Research, Inc.
72 TR7007M SII User Guide – Hardware
9.6.2 EzLINK
EzLink is a suite of software tools to test if a serial connection is working properly.
EzLink is a diagnostic software tool often used during system setup. In case of any system
error, the EzLink software can easily identify whether the problem is related to hardware or
software.
Once the EzLink program is running, it will start with detecting all extension devices that are
currently on-line. These devices will then be classified as either I/O type or Motion type. From
the complete list of control modules identified, it is therefore easy to verify if the system is
working properly or not. It is also possible to perform a functional test just by clicking on the
individual extension device.
Test Procedure:
1) Open EzLink
For Windows XP, 32bit computer (TR7550), the execute file is in
[D:\SYNTEK\TRI_0331_EzLink_32\EzLink.exe]
For Windows XP, 64bit computer (TR7066/7007/7700), the execute file is in
[D:\SYNTEK\X64_Driver_DLL_Dev\EzLink_64.exe]
2) Press [Hardware Search] button to find DSP card. Refer to the following figures.
Figure 111: Hardware Search
Test Research, Inc.
TR7007M SII User Guide – Hardware 73
Figure 112: Finish Finding DSP Card
3) Scanning for Extension Devices
Once the entire system connection is established successfully, the program will scan for all
extension devices to identify the total quantity, current status, availability, and the
characteristics of these devices.
Refer to the following figure. Select [PCIL112_0] under the Master Device then press
[REFLASH RING] to search all Slave Module of X axis.
Figure 113: EzLink Scan Device Screen