00191332-01.pdf - 第163页
User Manual Test Program SITEST 4 Mapping Software Version 405.xx Issue 01/99 4.4 IC Mapping 4 - 15 ● Cli ck on the icon to r etur n to th e main vie w . NOTE IC mapp ing can al so be st arted usi ng the Calib rate mach …
4 Mapping User Manual Test Program SITEST
4.4 IC Mapping Software Version 405.xx Issue 01/99
4 - 14
Fig. 4.4.1 "IC mapping" Display
The following functions are available in the "IC mapping" display:
– Right to select the right conveyor track
– Left to select the left conveyor track of a dual conveyor
– Start to start the mapping run
– Continue to continue mapping
– Display mapping data to display the mapping data determined
● If a dual conveyor is installed, activate the radio button for the conveyor track for which mapping is to be
performed.
● Click on the Start button and follow the directions displayed on the screen.
The gantry performs the mapping run. After the mapping run has been completed without any errors, the
data thus determined is automatically saved.
● If a dual conveyor is installed, activate the radio button for the conveyor track for which mapping has not
yet been performed.
● Click again on the Start button and follow the directions displayed on the screen.
The gantry performs the mapping run on the selected conveyor track. After the mapping run has been
completed without any errors, the data thus determined is automatically saved.
User Manual Test Program SITEST 4 Mapping
Software Version 405.xx Issue 01/99 4.4 IC Mapping
4 - 15
● Click on the icon to return to the main view.
NOTE
IC mapping can also be started using the
Calibrate machine...
-->
Head mapping
function (see chapt. 3,
section 3.2). First the RV mapping is performed, then the IC mapping.
4
CAUTION
As the data will be overwritten during PCB mapping, it is necessary that RV and IC mapping be repeated after
every PCB mapping operation.
4
4 Mapping User Manual Test Program SITEST
4.4 IC Mapping Software Version 405.xx Issue 01/99
4 - 16