00191332-01.pdf - 第56页
1 General Functions User Manual Test Program SITEST 1.5 Toggling Cycle Mode On/Off Software Version 405.xx Issue 01/99 1 - 14
User Manual Test Program SITEST 1 General Functions
Software Version 405.xx Issue 01/99 1.5 Toggling Cycle Mode On/Off
1 - 13
1.5 Toggling Cycle Mode On/Off
● For toggling the cycle mode function, click on
General functions
-->
Cycle mode...
on the menu bar,
or press the key combination
ALT
+
t
.
The "Cycle mode" setting box opens.
● Click on the
On
radio button to activate the cycle mode, or on the
Off
radio button to deactivate the
cycle mode.
● Click on the
OK
button. The cycle mode will be activated or deactivated.
1 General Functions User Manual Test Program SITEST
1.5 Toggling Cycle Mode On/Off Software Version 405.xx Issue 01/99
1 - 14
User Manual Test Program SITEST 1 General Functions
Software Version 405.xx Issue 01/99 1.6 Gantry Teaching
1 - 15
1.6 Gantry Teaching
● Click, for example, on the
Teach
button in the "Gantry functions" (see Fig. 0.3.4) display.
The teach functions are automatically activated if the setting box below is displayed.
● If you wish to set the step size for traversing the gantry, activate the corresponding radio button for the
desired step size in the "Step" field, or press the corresponding number key on the keyboard ("1" repre-
senting the smallest, "0" the largest step size).
● To move the gantry, actuate the
+x
,
-x
,
+y
or
-y
buttons in the setting box, or the cursor keys ↑ ↓ ← → on
the keyboard.
NOTE
From a position in front of the machine looking in the direction of travel, the arrows on the buttons and
cursor keys correspond the gantry’s direction of travel. Every time a button or cursor key is ac-
tuated, the gantry will be traversed by one step in the step size selected. The current gantry position
at any given time is displayed in the setting box in the "Current position" field.
● Click on the
PCB camera
button. The screen display switches to the PCB camera at the gantry.
● Actuate the cursor keys ↑ ↓ ← → on the keyboard to teach, for example, the PCB reference corner
position.
● When teaching has been completed, press
ESC
to switch the monitor back to the normal program mode.