00191332-01.pdf - 第75页
User Manual Test Program SITEST 2 Functions for the Adjustment of the Machine Software Version 405.xx Issue 01/99 2.1 Axis Functions 2 - 3 2.1 Axis Functions The axis functio ns are req uired for the adjustme nt of the d…
2 Functions for the Adjustment of the Machine User Manual Test Program SITEST
Software Version 405.xx Issue 01/99
2 - 2
User Manual Test Program SITEST 2 Functions for the Adjustment of the Machine
Software Version 405.xx Issue 01/99 2.1 Axis Functions
2 - 3
2.1 Axis Functions
The axis functions are required for the adjustment of the dynamic behavior of the axes.
NOTE
Prior
to the start of the adjustment operations a reference run must be performed for all axes (see
section 1.4).
2
2.1.1 Gantry Axis Functions
● In the "Gantry" display (see Fig. 0.3.4) click on the icon to switch to the "Gantry axis
functions" display.
Fig. 2.1.1 "Gantry axis functions" Display
2 Functions for the Adjustment of the Machine User Manual Test Program SITEST
2.1 Axis Functions Software Version 405.xx Issue 01/99
2 - 4
To perform the individual functions, proceed as follows:
● In the "Axis" field activate the radio button for the axis to be adjusted ("x-axis" or "y-axis")
● Select the
Reference run
function if the axis has not been referenced yet.
● To move the axis to a given position in one operation, click on the
Position axis..
button. The setting
box below opens.
● Select the
Target position [DIGIT]
line by double-clicking to enter the desired target position. An input
box opens.
● Enter the target position and confirm your entry by clicking on
Accept
.
● Select the
Positioning type
line by double-clicking to choose the desired positioning type. The setting
box below opens.
NOTE
In this present software version only one positioning type is available for both the x- and y-axis.
● Confirm the selected positioning type by clicking on Accept.