00197279-03_SM_Glue-Feeder_EN.pdf - 第20页
Replacing Spare Parts Left Side Cover 3.7.1 Removing the Left Side Cover 20 Service Manual SIPLACE Glue Feeder 3.7 3 . 7 L e f t S id e C o v e r Left Side Cover Required spare parts Cover for glue fee der, left, item no…
Replacing Spare Parts
3.6.2 Fitting the Cartridge Adapter O-ring O-Ring for Cartridge Adapter
Service Manual SIPLACE Glue Feeder 19
3.6.2
3.6.2 Fitting the Cartridge Adapter O-ring
Fitting the Cartridge Adapter O-ring
► Grip this tiny loop and pull the O-ring off the cartridge
adapter.
► As shown in the diagram, fit the O-ring on one side
onto the cartridge adapter and pull it over the rim.
Make sure that the O-ring is fitted evenly against the
surface all around.
► Fit the hose to the cartridge adapter.
► Fit the cartridge adapter into place (see "3.5.2 Fitting
the Cartridge Adapter" [ ➙ 16]).
Replacing Spare Parts
Left Side Cover 3.7.1 Removing the Left Side Cover
20 Service Manual SIPLACE Glue Feeder
3.7
3.7 Left Side Cover
Left Side Cover
Required spare parts
Cover for glue feeder, left, item no. 03088710-xx
Required tools
▪ Phillips screwdriver
▪ TORX screwdriver size T8
3.7.1
3.7.1 Removing the Left Side Cover
Removing the Left Side Cover
3.7.2
3.7.2 Fitting the Left Side Cover
Fitting the Left Side Cover
► Carefully place the feeder module with the right-side
side down on a stable, level and clean surface.
► Loosen the screws marked in the diagram. The
screws 1, 2 and 3 are Torx screws, while all other
ones are Phillips screws.
► Carefully place the feeder module with the right-side
side down on a stable, level and clean surface.
► Loosen the screws marked in the diagram. The
screws 1, 2 and 3 are Torx screws, while all other
ones are Phillips screws.
CAUTION
Do not distort the screws
When you tighten the screws, make sure that these are NOT distorted.
Replacing Spare Parts
3.8.1 Removing the Right Side Cover Right Side Cover
Service Manual SIPLACE Glue Feeder 21
3.8
3.8 Right Side Cover
Right Side Cover
Required spare parts
Cover for glue feeder, right, item no. 03093796-xx
Required tools
▪ Phillips screwdriver
3.8.1
3.8.1 Removing the Right Side Cover
Removing the Right Side Cover
3.8.2
3.8.2 Fitting the Right Side Cover
Fitting the Right Side Cover
► Carefully place the feeder module with the left-hand
side down on a stable, level and clean surface.
► Loosen the Philips screws marked in the diagram.
► Carefully place the feeder module with the right-side
side down on a stable, level and clean surface.
► Fasten the Philips screws marked in the diagram.
CAUTION
Do not distort the screws
When you tighten the screws, make sure that these are NOT distorted.