00197279-03_SM_Glue-Feeder_EN.pdf - 第95页

a c p a g e

Replacing Spare Parts

Handle assembly 3.24.2 Fitting the Handle Assembly

94 Service Manual SIPLACE Glue Feeder

► Fasten the marked Allen screw. Use a size 2.5 Allen

key for this.

► Run the flat ribbon cable as shown in the diagram.

► Carefully fold the flat ribbon cable as marked in the di

agram.

Make sure that the blue surface at the end of the ca

ble is at the top.

► Use double-sided adhesive band to fix the flat ribbon

cable at the marked place to the glue feeder frame.

► Insert the flat ribbon cable as far as possible into the

connection.

Make sure that the blue surface at the end of the ca

ble is at the top and that the flat ribbon cable lies

straight in the connection.

► Swing the lock on the connection down.

Make sure that the flat ribbon cable is fitted firmly in

the connection. Tug gently on the cable to check.

► Check again whether the flat ribbon cable is fitted

straight in the connection.

If necessary, open the connection and correct the po

sition of the flat ribbon cable before closing the con

nection again.

► Fasten the left side cover (see "3.7.2 Fitting the Left

Side Cover" [ ➙ 20].

acpage

Item no.: 00197279-03 ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München

Germany