00197279-03_SM_Glue-Feeder_EN.pdf - 第84页
Replacing Spare Parts Coupler Plug 3.21.2 Fitting the Coupler Plug 84 Service Manual SIPLACE Glue Feeder See also 3.8.2 Fit ting the R ight Side Cove r [ ➙ 21] ► Insert the hose and coupler plug into the glue feede r…
Replacing Spare Parts
3.21.2 Fitting the Coupler Plug Coupler Plug
Service Manual SIPLACE Glue Feeder 83
3.21.2
3.21.2 Fitting the Coupler Plug
Fitting the Coupler Plug
► Loosen the inner nut completely and pull this over the
hose and off. (1)
► Pull the coupler plug and hose out of the glue feeder
frame. (2)
► Open the lock on the coupler plug and pull out the
hose.
► Push the hose as far as possible into the lock on the
coupler plug.
Replacing Spare Parts
Coupler Plug 3.21.2 Fitting the Coupler Plug
84 Service Manual SIPLACE Glue Feeder
See also
3.8.2 Fitting the Right Side Cover [ ➙ 21]
► Insert the hose and coupler plug into the glue feeder
frame. (1)
► Push the nut over the hose and then tighten it. (2)
► Push the hose as far as possible into the plug-in con
-
nector lock on the solenoid valve.
► Tighten the inner nut, fastening the coupler plug to
the frame. Use 2 size 17 fork wrenches for this.
Use one to hold the nut on the outside of the frame,
so that this nut does not turn.
► Fasten the right side cover (see .
Replacing Spare Parts
3.22.1 Removing the Cartridge Holder Cartridge Holder Assembly
Service Manual SIPLACE Glue Feeder 85
3.22
3.22 Cartridge Holder Assembly
Cartridge Holder Assembly
Required spare parts
Cartridge holder assembly, item no. 03094060- xx
Required tools
▪ Allen key size 2.5
3.22.1
3.22.1 Removing the Cartridge Holder
Removing the Cartridge Holder
► Remove the two marked screws. Use a size 2.5 Allen
key for this.
► Carefully lift the cartridge holder off the glue feeder.
Make sure that the cartridge holder does not hit the
cartridge pipe.