00197279-03_SM_Glue-Feeder_EN.pdf - 第27页
Replacing Spare Parts 3.10.2 Fitting the Heating Cable Heating Cable Service Manual SIPLACE Glue Feeder 27 3.10.2 3 . 1 0 . 2 F it t in g t h e H e a t in g C a b le Fitting the Heating Cable ► Insert the heating cable c…
Replacing Spare Parts
Heating Cable 3.10.1 Removing the Heating Cable
26 Service Manual SIPLACE Glue Feeder
► Open the cable ties.
Use diagonal cutter for this, for example.
On the left side of the glue feeder:
► Pull the heating cable connector out of the heating
control unit.
► As shown in the diagram, insert the end of the heating
cable through the frame, from the left side to the right
side of the glue feeder.
► Remove the heating cable.
Replacing Spare Parts
3.10.2 Fitting the Heating Cable Heating Cable
Service Manual SIPLACE Glue Feeder 27
3.10.2
3.10.2 Fitting the Heating Cable
Fitting the Heating Cable
► Insert the heating cable connector through the frame,
from the right side to the left side of the glue feeder.
On the left side of the glue feeder:
► As shown in the diagram, insert the heating cable
connector into the heating control unit.
On the right side of the glue feeder:
► Fix the heating cable into place with a cable tie.
Replacing Spare Parts
Heating Cable 3.10.2 Fitting the Heating Cable
28 Service Manual SIPLACE Glue Feeder
See also
3.8.2 Fitting the Right Side Cover [ ➙ 21]
► Run the heating cable in the cable duct, as shown in
the diagram.
► Plug the heating cable connector onto the heating.
► Fasten the left side cover (see "3.7.2 Fitting the Left
Side Cover" [ ➙ 20].
► Fasten the right side cover (see .