00197279-03_SM_Glue-Feeder_EN.pdf - 第36页
Replacing Spare Parts Dispenser Nozzle 3.12.2 Fitting the Dispenser Nozzle 36 Service Manual SIPLACE Glue Feeder 3.12.2 3 . 1 2 . 2 F it t in g t h e D is p e n s e r N o z z le Fitting the Dispenser Nozzle ► Lift the fl…
Replacing Spare Parts
3.12.1 Removing the Dispenser Nozzle Dispenser Nozzle
Service Manual SIPLACE Glue Feeder 35
3.12.1
3.12.1 Removing the Dispenser Nozzle
Removing the Dispenser Nozzle
CAUTION
Poisonous and hazardous substances
To avoid direct contact with the glue, always wear protective gloves during this work.
► Unplug the heating connector from the nozzle heat
-
ing.
► Position the two lugs of the special tool into the two
holes in the union nut.
► Loosen the union nut by turning it anticlockwise.
► Remove the union nut.
► Remove the nozzle heating.
Replacing Spare Parts
Dispenser Nozzle 3.12.2 Fitting the Dispenser Nozzle
36 Service Manual SIPLACE Glue Feeder
3.12.2
3.12.2 Fitting the Dispenser Nozzle
Fitting the Dispenser Nozzle
► Lift the flat nozzle off the jet block (spare fluidic).
CAUTION
Poisonous and hazardous substances
To avoid direct contact with the glue, always wear protective gloves during this work.
► Place the flat nozzle centrally onto the thread of the
jet block (spare fluidic).
► Place the nozzle heating onto the jet block and align
this straight on the cartridge pipe.
Replacing Spare Parts
3.12.2 Fitting the Dispenser Nozzle Dispenser Nozzle
Service Manual SIPLACE Glue Feeder 37
► Fit the union nut onto the dispenser nozzle.
► Position the two lugs of the special tool into the two
holes in the union nut.
► Tighten the union nut by turning it clockwise.
► Insert the heating connector into the nozzle heating,
up to the stop.