00197279-03_SM_Glue-Feeder_EN.pdf - 第91页

Replacing Spare Parts 3.24.1 Removing the Handle Assembly Handle assembly Service Manual SIPLACE Glue Feeder 91 ► Remove the 3 m arked sc re ws with a size T8 Torx screwdriver and then r emove the co ver plate. ► Push th…

Replacing Spare Parts

Handle assembly 3.24.1 Removing the Handle Assembly

90 Service Manual SIPLACE Glue Feeder

► Remove the marked Allen screw. Use a size 2.5 Allen

key for this.

► Remove the right side cover (see "3.8.1 Removing

the Right Side Cover" [ ➙ 21])

► Pull the cover on the pressure control valve up and

off. (1)

► Remove the nut fastening the pressure control valve.

Use a size 24 fork wrench for this. (2)

► Carefully pull the pressure control valve vertically

downwards and out of the glue feeder frame.

Replacing Spare Parts

3.24.1 Removing the Handle Assembly Handle assembly

Service Manual SIPLACE Glue Feeder 91

► Remove the 3 marked screws with a size T8 Torx

screwdriver and then remove the cover plate.

► Push the handle cover at the side out of the glue feed

er handle.

► Push the handle at the side out of the glue feeder

frame.

Replacing Spare Parts

Handle assembly 3.24.2 Fitting the Handle Assembly

92 Service Manual SIPLACE Glue Feeder

3.24.2

3.24.2 Fitting the Handle Assembly

Fitting the Handle Assembly

► As shown in the diagram, push the handle at the side

onto the glue feeder frame.

► As shown in the diagram, push the handle cover at

the side into the glue feeder handle.

► As shown in the diagram, fasten the cover plate with

the 3 marked Torx screws. Use a size T8 TORX

screwdriver for this.