00197279-03_SM_Glue-Feeder_EN.pdf - 第96页

Item no.: 00197279-03 ASM Assembly Systems GmbH & Co. KG Rupert-Mayer-Strasse 44 81379 München Germany www.siplace.com

100%1 / 96
Replacing Spare Parts
Handle assembly 3.24.2 Fitting the Handle Assembly
94 Service Manual SIPLACE Glue Feeder
► Fasten the marked Allen screw. Use a size 2.5 Allen
key for this.
► Run the flat ribbon cable as shown in the diagram.
► Carefully fold the flat ribbon cable as marked in the di
-
agram.
Make sure that the blue surface at the end of the ca
-
ble is at the top.
► Use double-sided adhesive band to fix the flat ribbon
cable at the marked place to the glue feeder frame.
► Insert the flat ribbon cable as far as possible into the
connection.
Make sure that the blue surface at the end of the ca
-
ble is at the top and that the flat ribbon cable lies
straight in the connection.
► Swing the lock on the connection down.
Make sure that the flat ribbon cable is fitted firmly in
the connection. Tug gently on the cable to check.
► Check again whether the flat ribbon cable is fitted
straight in the connection.
If necessary, open the connection and correct the po
-
sition of the flat ribbon cable before closing the con
-
nection again.
► Fasten the left side cover (see "3.7.2 Fitting the Left
Side Cover" [ ➙ 20].
acpage
Item no.: 00197279-03 ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 München
Germany
www.siplace.com