00197279-03_SM_Glue-Feeder_EN.pdf - 第28页
Replacing Spare Parts Heating Cable 3.10.2 Fitting the Heating Cable 28 Service Manual SIPLACE Glue Feeder See also 3.8.2 Fit ting the R ight Side Cove r [ ➙ 21] ► Run the h eating cable in the cable du ct, as shown …
Replacing Spare Parts
3.10.2 Fitting the Heating Cable Heating Cable
Service Manual SIPLACE Glue Feeder 27
3.10.2
3.10.2 Fitting the Heating Cable
Fitting the Heating Cable
► Insert the heating cable connector through the frame,
from the right side to the left side of the glue feeder.
On the left side of the glue feeder:
► As shown in the diagram, insert the heating cable
connector into the heating control unit.
On the right side of the glue feeder:
► Fix the heating cable into place with a cable tie.
Replacing Spare Parts
Heating Cable 3.10.2 Fitting the Heating Cable
28 Service Manual SIPLACE Glue Feeder
See also
3.8.2 Fitting the Right Side Cover [ ➙ 21]
► Run the heating cable in the cable duct, as shown in
the diagram.
► Plug the heating cable connector onto the heating.
► Fasten the left side cover (see "3.7.2 Fitting the Left
Side Cover" [ ➙ 20].
► Fasten the right side cover (see .
Replacing Spare Parts
3.11.1 Removing the Cartridge Pipe Cartridge Pipe
Service Manual SIPLACE Glue Feeder 29
3.11
3.11 Cartridge Pipe
Cartridge Pipe
Required spare parts
Cartridge pipe, item no. 03089046-xx
Tools and equipment required
▪ Spanner wrench, 8 mm
▪ Heating key (on the glue feeder)
▪ Disposable protective gloves
3.11.1
3.11.1 Removing the Cartridge Pipe
Removing the Cartridge Pipe
CAUTION
Poisonous and hazardous substances
To avoid direct contact with the glue, always wear protective gloves during this work.
► Place the glue feeder down on a firm surface.
► Hold the cartridge tightly with one hand.
► Turn the cartridge adapter anticlockwise by about
90°.