00197279-03_SM_Glue-Feeder_EN.pdf - 第25页
Replacing Spare Parts 3.10.1 Removing the Heating Cable Heating Cable Service Manual SIPLACE Glue Feeder 25 3.10 3 . 1 0 H e a t in g C a b le Heating Cable Required spare parts Cable for nozzle heating , ite m no. 03094…
Replacing Spare Parts
Nozzle Heating 3.9.2 Fitting the Nozzle Heating
24 Service Manual SIPLACE Glue Feeder
► Fit the union nut onto the dispenser nozzle.
► Position the two lugs of the special tool into the two
holes in the union nut.
► Tighten the union nut by turning it clockwise.
► Insert the heating connector into the nozzle heating,
up to the stop.
Replacing Spare Parts
3.10.1 Removing the Heating Cable Heating Cable
Service Manual SIPLACE Glue Feeder 25
3.10
3.10 Heating Cable
Heating Cable
Required spare parts
Cable for nozzle heating, item no. 03094174S-xx
Tools and equipment required
▪ Diagonal cutter
3.10.1
3.10.1 Removing the Heating Cable
Removing the Heating Cable
► Remove the right side cover (see "3.8.1 Removing
the Right Side Cover" [ ➙ 21])
► Remove the left side cover (see "3.7.1 Removing the
Left Side Cover" [ ➙ 20].
► Unplug the heating cable from the heating.
On the right side of the glue feeder:
► Remove the heating cable from the cable duct.
Replacing Spare Parts
Heating Cable 3.10.1 Removing the Heating Cable
26 Service Manual SIPLACE Glue Feeder
► Open the cable ties.
Use diagonal cutter for this, for example.
On the left side of the glue feeder:
► Pull the heating cable connector out of the heating
control unit.
► As shown in the diagram, insert the end of the heating
cable through the frame, from the left side to the right
side of the glue feeder.
► Remove the heating cable.