SPF维修.pdf - 第26页
2.1 Installation Procedure SERVICE MANUAL SPF 2.1−1 D54SEC−1 1−040−C0 2.1 Installation Procedure D54SEC−1 1−040−C0 Sentence No. 2.1.1 Installation Position Installation position 1. Decide machine installation position fr…
SPF
SERVICE MANUAL
2.0−2
D54SEC−11−000−A0
D54SEC−11−000−A0
Sentence No.
2.INSTALLATION
This chapter describes information on Panasert installation.
· Be sure to read ’Safety Precautions’ in this manual carefully.
2.1 Installation Procedure
SERVICE MANUAL
SPF
2.1−1
D54SEC−11−040−C0
2.1 Installation Procedure
D54SEC−11−040−C0
Sentence No.
2.1.1 Installation Position
Installation position
1. Decide machine installation position from layout diagram. (CAD diagram, etc.)
2. Mark the reference points of each machine on the floor with a maker pen, etc.
=HINT=
In most cases the machine front corners are used as reference points.
REF−G1
MSF
MSR
Reference point
*C−CON
Reference point
Reference point
C−CON
C−CON
Reference point
SPF
*C−CON are connection conveyors which stand between machines.
3. Install the main body of each machine temporarily at reference point. (Except for C-CON, etc.)
4. In the case of chip mounting line, the installation should start from the heaviest machine.
(MSR, etc.).
Reference point
MSR
5. Install SPF based on the heaviest machine (MSR) as reference.
MSR
C−CON
Reference point
Reference point
SPF
SPF
2.1 Installation Procedure
SERVICE MANUAL
2.1−2
D54SEC−11−040−C0
2.1.2 Leveling Machine
Leveling machine
1. Remove the fixed bracket for transfer.
Fixed bracket for transfer
Cleaner unit
Main body frame
2. Set machine main body accurately on the reference points.
3. Remove fixtures (for transportation) of SY, SCR axes (stage Y, q axes), SQ axis (squeegee X axis),
CX, CY axes (camera X, Y axes), CL axis (cleaner Y axis) and stage fixture, squeegee fixtures and
camera Y axis fixtures.
4. Move the stage to center of machine main body.
5. Allow the 2 center legs of the main body to float and adjust the level of the machine using the 4 corner
legs. (Fig. 1)
Levels
Stage Y axis
LM guides
Stage
Cleaner
Camera
Squeegee
350mm
450mm
(Fig. 1)
6. Adjust the 4 legs to level the machine, and fasten with locknut.
=Specification=
Height : 915 ± 5mm