SPF维修.pdf - 第35页
SPF 2.1 Installation Procedure SERVICE MANUAL 2.1−10 D54SEC−1 1−040−C0 = MEMO =
2.1 Installation Procedure
SERVICE MANUAL
SPF
2.1−9
D54SEC−11−040−C0
2.1.8 Precision, Performance Check in Auto Operation
Automatic calibration check
1. Set screen and check automatic calibration mode.
2. Set PCB on loader unit,and start 1 block mode operation, check whether PCB pattern matches with
screen pattern.
Printing precision check
1. Take soft soldering on screen and perform trial printing.
2. Check the operation of the cleaner.
3. Print for the front and back. Input offset actual measurement (print offset in NC programing mode) in
case that soft soldering does not agree PCB pattern.
4. Check dirt on PCB adjustment assy or PCB recognition mark in case of random positioning.
After that check automatic calibration mode operation and input calibrated data into.
Auto operation check
1. Check whether the cleaner operates as the NC program.
2. Check whether the other optional units operate as the NC program.
3. Check PCB transfer.
4. Check automatic continue operation.
2.1.9 Record Machine Information
Record machine information
1. Save machine data to 2 floppies. (One for Panasonic to keep and the other for customer.)
Select ’DATA INPUT OUTPUT’ ® ’MACHINE DATA’ ® ’SAVE’.
2. Print out 2 copies of the machine data. (One for Panasonic to keep and the other for customer.)
Select ’DATA INPUT OUTPUT’ ® ’MACHINE DATA’ ® ’PRINT’.
SPF
2.1 Installation Procedure
SERVICE MANUAL
2.1−10
D54SEC−11−040−C0
= MEMO =
SERVICE MANUAL
SPF
3.0−1
3ダミー(Sectionのレベル1)
3.0ダミー(Sectionのレベル2)