SPF维修.pdf - 第44页
SERVICE MANUAL SPF 4.0−3 D54SEC−W0−000−A0 Indication method of this chapter Each section has the procedure for performing maintenance as described below . Maintenance of the current page Next maintenance to be done Maint…
SPF
SERVICE MANUAL
4.0−2
D54SEC−W0−000−A0
D54SEC−W0−000−A0
Sentence No.
4.MAINTENANCE GUIDE
(MECHANICAL)
This includes explanations of how to check, adjust and repair when performing
installation, inspection.
· Improper machine operation could result in personal injury.
· Be sure to read ’Safety Precautions’ in this manual carefully.
· Refer to ’Operation Manual’, ’Programming Manual’ and ’Reference Manual’
from the Operating Instructions for machine operation.
· Please have the jigs and tools supplied with the machine available.
The ’ =Preparation= ’ section of each procedure does not include these jigs and
tools.
SERVICE MANUAL
SPF
4.0−3
D54SEC−W0−000−A0
Indication method of this chapter
Each section has the procedure for performing maintenance as described below.
Maintenance of the current page
Next maintenance to be done
Maintenance must be done
before performing this
maintenance
When there is no maintenance which should be performed before and after this work, it displays as
follows.
Notandum for safety
Be sure to read ’Maintenance Manual / Safety Precautions’ carefully and always follow the sequence
when performing maintenance.
WARNING
Always shut OFF the machine power switch
before performing maintenance.
WARNING
Turn the power of unrelated axis motor drivers OFF when
maintenance must be performed with the machine power
ON.
WARNING
Stop the air supply and insure that the air pressure is 0
when performing maintenance.
WARNING
Do not use the maintenance switches except
when performing maintenance work.
SPF
SERVICE MANUAL
4.0−4
D54SEC−W0−000−A0
= MEMO =