4OM-1626-001_w.pdf - 第113页

4OM-1610 2-10 3. Machine Information : Chap.2 Management Information Code Display Area A (The outline of the Management Information) Display Area B (The details of the Management Information) 018205 Multi-tray (Rear) Clo…

100%1 / 251
4OM-1610
2-9
3. Machine Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
017501 Operation mode set conrmation
"Feeder Connection" or "Feeder Serial Communication" of Test Operation Mode is
set. Execute it after reset Operation Mode.
017601 Inching movement
Perform zeroing.
017602 Inching movement
Please push the Feeder Base Ready SW
017603 Inching movement
Close the safety cover of multi-tray, and press the Ready button).
017604 Inching movement
The range is out of movable Range.
017605 Inching movement
HL-axis is fallen. There is a possibility of collision between Noz and axis. Please
perform zeroing of HL-axis or move it to origin position.
017606 Inching movement
L1-axis is fallen. There is a possibility of collision between Noz and axis. Please
perform zeroing of L1-axis or move it to origin position.
017607 Inching movement
L2-axis is fallen. There is a possibility of collision between Noz and axis. Please
perform zeroing of L2-axis or move it to origin position.
017608 Inching movement
L3-axis is fallen. There is a possibility of collision between Noz and axis. Please
perform zeroing of L3-axis or move it to origin position.
017701 Zeroing(set axis)
Ready for Feeder Base Press SW
017702 Zeroing(set axis)
Close the safety cover of multi-tray, and press the Ready button).
018001 Recycling Conveyor (rear)
The recycle conveyor (rear) is lled up.
018002 Recycling Conveyor (rear)
The connection of Recycle conveyor(Rear) differs from Component Data. Or multi-
connection.
018101 Recycling Conveyor (front)
The recycle conveyor (front) is lled up.
018102 Recycling Conveyor (front)
The connection of Recycle conveyor(Front) differs from Component Data. Or
multi-connection.
018201 Multi-tray (Rear)
Close the safety cover of multi-tray, and press the Ready button.
018202 Multi-tray (Rear)
Pallet of multi-tray is drawn out. Execute zeroing all, store the pallet.
018203 Multi-tray (Rear)
Multi-tray breaking out was detected. Execute zeroing all, store the pallet.
018204 Multi-tray (Rear)
Press [READY] button of Feeder base, and supply the power for Multi Tray.
0911-001
4OM-1610
2-10
3. Machine Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
018205 Multi-tray (Rear)
Close the safety cover(Center) of multi-tray, and press [READY] button.
018206 Multi-tray (Rear)
Close the safety cover(Lower) of multi-tray, and press [READY] button.
018207 Multi-tray (Rear)
Close the safety cover(Upper) of multi-tray, and press [READY] button.
018208 Multi-tray (Rear)
Zeroing of Traverse-axis is not nished. Perform zeroing of multi-tray.
018209 Multi-tray (Rear)
Zeroing of Elevator1-axis is not nished. Perform zeroing of multi-tray.
01820a Multi-tray (Rear)
Zeroing of Elevator2-axis is not nished. Perform zeroing of multi-tray.
01820b Multi-tray (Rear)
Pickup miss cmpnt(8mm) is detected.[B15417]
01820c Multi-tray (Rear)
Pickup miss cmpnt(14mm) is detected.[B15418]
01820d Multi-tray (Rear)
Pickup miss cmpnt(28mm) is detected.[B15419]
01820e Multi-tray (Rear)
Pallet Chuck claw is open.
01820f Multi-tray (Rear)
Pallet Flying away is detected.
018210 Multi-tray (Rear)
Magazine1 (Lower) Shutter on Traverse side is open.
018211 Multi-tray (Rear)
Magazine2(Upper) Shutter on Traverse side is open.
018212 Multi-tray (Rear)
Access detecting Sensor (Right) : Cannot detect Elevator Unit
018213 Multi-tray (Rear)
Access detecting Sensor (Left) : Cannot detect Elevator Unit
018301 Multi-tray (Front)
Close the safety cover of multi-tray, and press the Ready button).
018302 Multi-tray (Front)
Pallet of multi-tray is drawn out. Execute zeroing all, store the pallet.
018303 Multi-tray (Front)
Multi-tray breaking out was detected. Execute zeroing all, store the pallet.
018304 Multi-tray (Front)
Press [READY] button of Feeder base, and supply the power for Multi Tray.
018305 Multi-tray (Front)
Close the safety cover (Center) of multi-tray, and press [READY] button.
018306 Multi-tray (Front)
Close the safety cover (Lower) of multi-tray, and press [READY] button.
018307 Multi-tray (Front)
Close the safety cover (Upper) of multi-tray, and press [READY] button.
018308 Multi-tray (Front)
Zeroing of Traverse-axis is not nished. Perform zeroing of multi-tray.
0911-001
4OM-1610
2-11
3. Machine Information : Chap.2
Management
Information Code
Display Area A (The outline of the Management Information)
Display Area B (The details of the Management Information)
018309 Multi-tray (Front)
Zeroing of Elevator1-axis is not nished. Perform zeroing of multi-tray.
01830a Multi-tray (Front)
Zeroing of Elevator2-axis is not nished. Perform zeroing of multi-tray.
01830b Multi-tray (Front)
Pickup miss cmpnt(8mm) is detected.[B15417]
01830c Multi-tray (Front)
Pickup miss cmpnt(14mm) is detected.[B15418]
01830d Multi-tray (Front)
Pickup miss cmpnt(28mm) is detected.[B15419]
01830e Multi-tray (Front)
Pallet Chuck claw is open.
01830f Multi-tray (Front)
Pallet Flying away is detected.
018310 Multi-tray (Front)
Magazine1 (Lower) Shutter on Traverse side is open.
018311 Multi-tray (Front)
Magazine2 (Upper) Shutter on Traverse side is open.
018312 Multi-tray (Front)
Access detecting Sensor (Right) : Cannot detect Elevator Unit
018313 Multi-tray (Front)
Access detecting Sensor (Left) : Cannot detect Elevator Unit
018401 Multi-tray is not ready to zeroing(Rear)
Execute all zeroing.
018501 Multi-tray is not ready to zeroing(Front)
Execute all zeroing.
018601 Warning of wiring error
Vacuum Pump 1CB Error
018602 Warning of wiring error
Monitor Error of DC load power
018603 Warning of wiring error
Monitor Error of Beam(1) CB Error
018604 Warning of wiring error
Monitor Error of Beam(2) CB Error
018701 Feeder Alternate
Illegal alternate setup of pattern program. Check the setup.
018702 Feeder Alternate
Invalid feeder in alternating. Set feeder valid
018801 XY Origin Offset
Illegal XY-Origin offset of Beam(Rear). Re-send Device data from NT, or execute
teaching XY-Origin offset.
018802 XY Origin Offset
Illegal XY-Origin offset of Beam(Front). Re-send Device data from NT, or execute
teaching XY-Origin offset.
018901 Feeder communication
Feeder(Rear) is on communication. Please wait for it, and then operate again.
0911-001