4OM-1626-001_w.pdf - 第136页
4OM-1610 3-5 3. Error IDs and Remedial Procedures : Chap.3 091 1-001 Error ID Error Name, Description, Cause, and Remedy 400416 Interlock Error Over squeeze2 detected (Rear)[B05] ----- 400417 Interlock Error Over squeeze…
4OM-1610
3-4
3. Error IDs and Remedial Procedures : Chap.3
0911-001
Error ID Error Name, Description, Cause, and Remedy
400409 Interlock Error
A pickup-failed component (Front) was detected. [DB-B****]
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
40040A Interlock Error
The feeder opening sensor (Rear) was shaded. [B****]
Please remove the factor which is shading the feeder opening sensor (rear), and
carry out zero return.
40040B Interlock Error
The feeder opening sensor (Front) was shaded. [B****]
Please remove the factor which is shading the feeder opening sensor (front), and
carry out zero return.
40040C Interlock Error
Disengaged Latch(Rear) was detected.
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
40040D Interlock Error
Disengaged Latch(Front) was detected.
1.Open the cover.
2.Conrm suppressor, Disengaged Latch and remove the devices.
3.Close the cover and Lock it.
40040E Interlock Error
The safety cover lock was released.
Close the safety cover and lock it.
40040F Interlock Error
Head (Rear) interlock was detected.
Please perform a zeroing.
400410 Interlock Error
Head (Front) interlock was detected.
Please perform a zeroing.
400411 Interlock Error
Air pressure down was detected.
Check air pipe came off or bend, air compressor.
400412 Interlock Error
Circuit breaker of Vacuum pomp was tripped.
Check vacuum pump and wiring.
400413 Interlock Error
Circuit breaker of XY Beam (Rear) was tripped.
Check servo amplier and cables.
400414 Interlock Error
Circuit breaker of XY Beam (Front) was tripped.
Check servo amplier and cables.
400415 Interlock Error
Over squeeze1 detected (Rear)[B05]
-----
4OM-1610
3-5
3. Error IDs and Remedial Procedures : Chap.3
0911-001
Error ID Error Name, Description, Cause, and Remedy
400416 Interlock Error
Over squeeze2 detected (Rear)[B05]
-----
400417 Interlock Error
Over squeeze3 detected (Rear)[B05]
-----
400418 Interlock Error
Pass level 1 error (Rear) detected[B04]
-----
400419 Interlock Error
Pass level 2 error (Rear) detected[B04]
-----
40041a Interlock Error
Pass level 3 error (Rear) detected[B04]
-----
40041b Interlock Error
Nozzle oat up 1 (Rear) detected[B1611]
Conrm Nozzle of Nozzle Stocker1(Rear).
40041c Interlock Error
Nozzle oat up 2 (Rear) detected[B1611]
Conrm Nozzle of Nozzle Stocker2(Rear).
40041d Interlock Error
Over squeeze1 detected (Front)[B05]
-----
40041e Interlock Error
Over squeeze2 detected (Front)[B05]
-----
40041f Interlock Error
Over squeeze3 detected (Front)[B05]
-----
400420 Interlock Error
Pass level 1 error (Front) detected[B04]
-----
400421 Interlock Error
Pass level 2 error (Front) detected[B04]
-----
400422 Interlock Error
Pass level 3 error (Front) detected[B04]
-----
400423 Interlock Error
Nozzle oat up 1 (Front) detected[B1611]
Conrm Nozzle of Nozzle Stocker1(Front).
400424 Interlock Error
Nozzle oat up 2 (Front) detected[B1611]
Conrm Nozzle of Nozzle Stocker2(Front).
4OM-1610
3-6
3. Error IDs and Remedial Procedures : Chap.3
0911-001
Error ID Error Name, Description, Cause, and Remedy
400425 Interlock Error
Emergency stop (Rear) detected
Drive after the power turns on.
400426 Interlock Error
Safety door (lower) of tray feeder unit opened.(Rear)[S0501]
Close the safety door(Lower) and operate it.
400427 Interlock Error
Safety door (upper) of tray feeder unit opened.(Rear)[S0502]
Close the safety door(Center) and operate it.
400428 Interlock Error
Safety door (center) of tray feeder unit opened.(Rear)[S0503]
Close the safety door(Upper) and operate it.
400429 Interlock Error
Chucking lever of pallet opened while elevator is moving.(Rear)[B15407, B15408]
Check out B15407, B15408, detection Sensor of closing Chucking lever of pallet.
40042a Interlock Error
Break out the pallet while elevator is moving.(Rear)[B15406]
Check out B15406(detecttion sensor of breaking out Pallet) and position of Pallet.
40042b Interlock Error
Detect pickup miss components on the pallet. (Rear)[B15417]
Please open the main cover and remove pickup miss components on the pallet.
40042c Interlock Error
Detect pickup miss components on the pallet. (Rear)[B15418]
Please open the main cover and remove the pickup miss components on tray
pallet.
40042d Interlock Error
Detect pickup miss components on the pallet. (Rear)[B15419]
Please open the main cover and remove the pickup miss components on tray
pallet.
40042e Interlock Error
Open the rack shutter while lower elevator is moving.(Rear)[B15521][B15523][B1
5525]
Check out B15521, B15523, B15525(the sensor of closing magazine rack
shutter).
40042f Interlock Error
Open the rack shutter while upper elevator is moving.(Rear)[B15527][B15529][B1
5531]
Check out B15527, B15529, B15531(the sensor of closing magazine rack
shutter).
400430 Interlock Error
Lower magazine positioning error.(Rear) [B15526]
Check Magazine Rack.
400431 Interlock Error
Upper magazine positioning error.(Rear) [B15532]
Check Magazine Clamp.