4OM-1626-001_w.pdf - 第212页
4OM-1610 3-81 3. Error IDs and Remedial Procedures : Chap.3 Error ID Error Name, Description, Cause, and Remedy 4b301 1 Cutter Error Failed in reading the number of connection axes. Please conrm AE-LINK wiring and Power…
4OM-1610
3-80
3. Error IDs and Remedial Procedures : Chap.3
0911-001
Error ID Error Name, Description, Cause, and Remedy
4b3003 Cutter Error
There is a time-out in Cutter-axis.(Zeroing operation start)
-----
4b3004 Cutter Error
Cutter-axis Time-out(Zeroing)
-----
4b3005 Cutter Error
Zeroing of Cutter-axis is not completed.
-----
4b3006 Cutter Error
There is a problem in Cutter-axis. (Positioning Operation)
-----
4b3007 Cutter Error
Cutter-axis Time-out(Positioning Operation)
-----
4b3008 Cutter Error
Alarm of Cutter-axis was detected.
-----
4b3009 Cutter Error
Recede operation was executed because alarm was detected during positioning
operation of Cutter-axis.
Please conrm whether there is an error in cutter unit(Being jammed in cutter
layer)
4b300a Cutter Error
Can not communicate with SV-NET P.C.B.
Please conrm AE-LINK wiring and Power wiring.
4b300b Cutter Error
Can not communicate with Driver
Please conrm Power wiring and AE-LINK wiring of driver in Cutter unit.
4b300c Cutter Error
Time-out of waiting for initializing completely
Please conrm AE-LINK wiring and Power wiring.
4b300d Cutter Error
Test mode of cutter is valid.
Please clear the check of [Cutter Movement disable] in the screen of test mode.
4b300e Cutter Error
The set of operation mode of Cutter is "Disable".
Please set operating mode of Cutter "Enable".
4b300f Cutter Error
Cutter can not move because Feeder Base is in downward position.
Please press READY switch of Feeder Base and move Feeder base to input
position.
4b3010 Cutter Error
Cutter can not move because Feeder Base in not positioned correctly.
Please connect connector of Feeder base.
4OM-1610
3-81
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
4b3011 Cutter Error
Failed in reading the number of connection axes.
Please conrm AE-LINK wiring and Power wiring.
4b3012 Cutter Error
Communication status Error
Please conrm AE-LINK wiring and Power wiring.
4b3013 Cutter Error
Communication status Error(Stand by)
Please conrm AE-LINK wiring and Power wiring.
4b3014 Cutter Error
Communication Status Error(Alarm)
Please conrm the wiring of driver in Feeder Base unit
4b3015 Cutter Error
Communication Status Error(OT)
Please conrm the wiring of Origin Sensor.
4b3016 Cutter Error
Communication Status Error(Connection O)
Please conrm AE-LINK wiring and Power wiring.
4b3017 Cutter Error
Communication Status Error(Driver Alarm)
Please conrm the wiring of driver in Feeder Base unit
4b3018 Cutter Error
Communication Status Error(SV-NET stopping)
Please conrm AE-LINK wiring and Power wiring.
4b3019 Cutter Error
Communication Status Error(Out of Connection number)
Please conrm AE-LINK wiring and Power wiring.
4b301a Cutter Error
Communication Status Error(SV-NET Error)
Please conrm AE-LINK wiring and Power wiring.
4b301b Cutter Error
Cutter-axis is not connected.
Please conrm AE-LINK wiring and Power wiring.
4b301c Cutter Error
Failed to start-up Communication of SV-NET
Please conrm AE-LINK wiring and Power wiring.
4b3101 Cutter(Servo Error)
Error of Power Driver, Over-current
Check out motor wiring or exchange both motor and driver.
4b3102 Cutter(Servo Error)
Overload Alarm
Check out motor wiring or exchange both motor and driver. Either, Conrm that
the blocking exists with cutter pieces.
4b3103 Cutter(Servo Error)
Speed Alarm
Need to adjust motor gain again.
0911-001
4OM-1610
3-82
3. Error IDs and Remedial Procedures : Chap.3
Error ID Error Name, Description, Cause, and Remedy
4b3104 Cutter(Servo Error)
Multi-rotation Error
Check motor wiring or exchange motor.
4b3105 Cutter(Servo Error)
The value of Deviation Counter was over the set value
Check the wiring of Origin sensor. Either, Exchange driver.
4b3106 Cutter(Servo Error)
Power Drive detected temperature error.
Ambient Temperature is too high. Exchange driver.
4b3107 Cutter(Servo Error)
Sensor Error
Conrm the wiring of Motor Encoder. Either, exchange motor
4b3108 Cutter(Servo Error)
High Drive voltage
Insufcient power capacity. Exchange driver.
4b3109 Cutter(Servo Error)
Low drive voltage
Please conrm the operating Power wiring which is inserted to driver.
4b310a Cutter(Servo Error)
Reading Error on permanent memory
Exchange Driver
4b310b Cutter(Servo Error)
Reading Error on permanent memory
Exchange Driver
4b310c Cutter(Servo Error)
CPU Error
Exchange Driver
4b310d Cutter(Servo Error)
Parameter Error
Please conrm the changed Parameter
4b310e Cutter(Servo Error)
Alarm code readout failed
-----
4b3201 Servo Motor Error
Error of processing Servo On
-----
4b3202 Servo Motor Error
Time-out of processing Servo On
-----
4b3203 Servo Motor Error
Error of processing Servo Off
-----
4b3204 Servo Motor Error
Time-out of processing Servo Off
-----
0911-001