FUJI 24 HEAD Replacing ALL syringe_IPS.pdf - 第43页
Edition 2.0 NXT/NXT2 Repair Training T ext H12HS(Q) Hea d FK-9F98-61-0E 7-15 FUJI MACHINE MFG . CO., L TD. 30. Recheck that the engraved li nes on the upper and lower parts of the scissors gear are aligned. 31. Attach a …
Edition 2.0 NXT/NXT2 Repair Training Text
H12HS(Q) Hea
d
FK-9F98-61-0E 7-14 FUJI MACHINE MFG. CO., LTD.
27. Attach the pusher to the syringe. Firstly, set a torque spanner (AA6KK0*) at the
position shown in the following photo.
28. Next, set a 4.0 mm spanner (PB9769*) at the position shown in the following photo.
29. Tighten the pusher with 1.0 Nm torque force.
Caution!
When tightening the pusher, hold the upper torque wrench and turn the
lower spanner anti-clockwise as viewed from above the head. Take care to
ensure that the lower spanner does not interfere with the nozzle existence
check sensor.
CONFIDENTIAL
SmartechMr.J FSun
Edition 2.0 NXT/NXT2 Repair Training Text
H12HS(Q) Hea
d
FK-9F98-61-0E 7-15 FUJI MACHINE MFG. CO., LTD.
30. Recheck that the engraved lines on the upper and lower parts of the scissors gear are
aligned.
31. Attach a spring coil collar to all the syringes.
32. Attach the head to a module and perform auto-calibration to check that there are no
errors.
33. Perform placement accuracy measurement（PAM ）to check the placement accuracy
following replacement of the syringes. Save the final offset file to the base on which the
head is used.
Note: For details of the placement accuracy measurement (PAM) refer to the NXT
（
NXT II
）
mechanical reference.
34. The syringe replacement is now complete.
Engraved line
Engraved lines on the upper
and lower gears are aligned
CONFIDENTIAL
SmartechMr.J FSun
Edition 2.0 NXT/NXT2 Repair Training Text
H12HS(Q) Hea
d
FK-9F98-61-0E 7-16 FUJI MACHINE MFG. CO., LTD.
MEMO:
CONFIDENTIAL
SmartechMr.J FSun